View Full Version : Motor Mounts
SensoRS6
May 28th, 2015, 20:13
Anyone know how to replace the motor mounts? Thanks for any help!
s8prtotype
May 29th, 2015, 05:08
Pay someone to do it haha
Other_Erik
May 29th, 2015, 13:27
Pay someone to do it haha
Seconded, if you have to ask...
Parts:
http://www.ecstuning.com/Audi-RS6--4.2T/Engine/Mount/
Any indy shop should be able to access by dismounting and lifting the engine just high enough to pull the old mount, put in the new, and remounting the engine.
O_E
DHall1
May 29th, 2015, 16:07
I would consider 034 mounts
rs6BC
May 30th, 2015, 16:41
I was going to say take the old ones off put the new ones on
hahnmgh63
May 30th, 2015, 19:03
I'm using the Stearns mounts which also come with the Resistor to plug into the stock Harness. I would recommend the softer ones which I have and are still stiffer than OEM. 034 are newer and maybe cheaper though, more like OEM, just a higher Durometer rubber and no sensor.
SensoRS6
May 31st, 2015, 02:54
I did order the stern firm, should be interesting to see how it feels. I've done engine mounts before, just not on the beast. Anyone have any tricks other than just lifting the engine slightly?