View Full Version : Indicator Stopped Working
stubro
February 26th, 2015, 20:21
OK so another new issue my indicator has stopped blinking. I can do it manually and the lights are working but wont do it on its own. Do I need to replace the whole indicator stock or is there another fix? Anyone else have these issues. I am only at 80K.
Thanks I searched but didn't see this in here.
Drifters
February 27th, 2015, 12:45
It is most likely your Hazard relay switch. Easy to replace and not too expensive.
stubro
February 27th, 2015, 13:42
Thanks I will give that a try
ben916
February 27th, 2015, 16:50
It is the Hazard button/relay as stated above.
BE CAREFUL of removing the carbon/wood trim, there are either 5 or 6 tabs that hold it into the dash.
stubro
February 27th, 2015, 17:57
Fair point. I have to take it to the dealer for something else so maybe I put the risk on them for this one. Thanks!
LIRS6
February 27th, 2015, 21:41
Had this happen to me as well - i just pushed the hazard in/out a few times ... no more problem
lswing
February 27th, 2015, 21:56
Had this happen to me as well - i just pushed the hazard in/out a few times ... no more problem
These cars are a bitch to work on sometimes!:mech:
stubro
February 28th, 2015, 20:43
So i pushed the hazard button in a few times and nothing changed. Then it was raining here in tampa today and went through some puddles and brake were a little wet and shuddered the car a little on breaking and guess whats it is working again :) Gremlins
16085