View Full Version : Daytona Wednesday
RS2racer
February 26th, 2015, 02:48
I've never posted pics of my Beast... So here are a few.
16062
16063
16064
lswing
February 26th, 2015, 02:52
Nice wheels and tint, clean. You still on DRC, looks a bit high in the back, or just parking?
kruat
February 26th, 2015, 03:08
Those are only 19s? They look huge. And I agree, seems a little high in the rear.
RS2racer
February 26th, 2015, 14:30
OEM B7 RS4 19's courtesy of Jimmy N from the forum, it's high on the back because I was doing tuning runs when I took these pics - no spare tire in the back, Optima battery, almost no gas in the tank , no tools, etc. It really jacks it up when you do crazy things like that :)
And, yes DRC which is leak free but I'm not a fan of the ride. I am thinking Koni's Sports on oem springs , or maybe H&R's.
DHall1
February 26th, 2015, 20:40
H&R sports on my daily driven RS. Excellent ride for this 50 something gear head. I like the ability to fine tune ride height. Good value for 1100.
http://i1304.photobucket.com/albums/s532/03RSTT/Mobile%20Uploads/image1-6_zpsa6f2f8a7.jpg
RS2racer
February 26th, 2015, 21:05
^^^ that's the ride height I'm looking for ! what shocks/struts are you on DH ?
Those VMR's look the business !
DHall1
February 26th, 2015, 21:19
H&R sport coilovers for the A6 4.2
Perfect ride for a daily. No bounce
Hotchkis sways
Tight 1 finger at all 4 corners
Vmr 19x9.5 et33 no spacers
Pss 255 35 19
DHall1
February 26th, 2015, 21:28
This is tight 1 finger gaps on my Avus. Better angle
KW V3s. Slightly higher spring rate
Oem 5 spokes 19x9 et30
http://i1304.photobucket.com/albums/s532/03RSTT/Mobile%20Uploads/image1-5_zpsxr7vv1y7.jpg
RS2racer
February 26th, 2015, 21:33
H&R sport coilovers for the A6 4.2
Perfect ride for a daily. No bounce
Hotchkis sways
Tight 1 finger at all 4 corners
Vmr 19x9.5 et33 no spacers
Pss 255 35 19
Ha ! that's the CO setup I had on my old 2003 S6 Avant and the car rode better than my Rs6 does currently....so glad to hear you're liking it for the RS . My cars already has the H bars installed with all new upper and lower control arm bushings ....so almost there.
I just need to search old posts to see what to do with the hydraulic lines once I take out the drc stuff. Thanks for sharing.