PDA

View Full Version : Aero Twin Wiper kit...?



RSoverAll
September 22nd, 2014, 01:05
Anyone have experience with these? I just wanna cleaner look of the OEM wipers and a little less clutter near the window area would help I think. I looked for the Valeo frame less blades, I hear they were discontinued. I have the Bosch Icons on my A4 and am not a fan- the look nor the function.

Does anyone know if these Aero twin set comes factory on the 6 in the EU market?


If I purchase these I will post up the results for the good of the board.

Let me know what the community thinks.


Thinking about picking these up...
http://www.ebay.com/itm/Audi-A6-4B-original-front-Aerotwin-wipers-aero-wiper-arms-for-S6-RS6-/400508542065?pt=Motors_Car_Truck_Parts_Accessories&hash=item5d402b5c71&vxp=mtr

mik15
September 22nd, 2014, 05:17
as far as i know they did come as standard on A6 C5, they were on my '02 A6 C5 2.5TDI Quattro, surprisingly they didn't on the 2004 RS6, but you can find the whole OEM AeroTwin arm and replace the old one. Don't go for the AeroTwin blades only that fit our wiper arms, because they don't look that good and neither are as efficient as ours, i did it on my previous RS6 and wasn't very happy about it.

the ones in the ink above are OEM, so they should fit well.

RSoverAll
September 22nd, 2014, 18:49
Alright. Well I emailed the seller to see if they could send me a part number just to check the RS6 compatibility. Hate to order them and get the wrong wipers especially considering they are across the pond and want a restocking fee for any returns.

bmlee007
September 23rd, 2014, 01:20
They should fit no problem, because you're replacing the entire arm. The connection on the wiper motor assembly is a splined piece, and these will slip down on and be held with a retaining bolt. It can be kind of a PITA to get the old wiper arm off, you may need a small gear puller to remove it.

I have these on my '02 C5 A6. The only issue I had with them was that I needed the wipers to pass PA inspection a couple of years ago, and NONE of the dealers/parts stores within an hour had them in stock. Had to be ordered and cost something like $75. I wound up going to Autozone and buying a regular refill set, tore them apart, and replaced just the wiper blade on the aero to get it passed that day. A few weeks later I found them on Tire Rack for something like $40 for the set.

For the RS6, I can go to any auto parts store and get new wipers for less than half the price.

lswing
September 23rd, 2014, 01:31
The stock wiper inserts from Rock Auto for $5 work great, easy to replace! I'll dig up the part number if you want...

RSoverAll
September 23rd, 2014, 01:43
They should fit no problem, because you're replacing the entire arm. The connection on the wiper motor assembly is a splined piece, and these will slip down on and be held with a retaining bolt. It can be kind of a PITA to get the old wiper arm off, you may need a small gear puller to remove it.

I have these on my '02 C5 A6. The only issue I had with them was that I needed the wipers to pass PA inspection a couple of years ago, and NONE of the dealers/parts stores within an hour had them in stock. Had to be ordered and cost something like $75. I wound up going to Autozone and buying a regular refill set, tore them apart, and replaced just the wiper blade on the aero to get it passed that day. A few weeks later I found them on Tire Rack for something like $40 for the set.

For the RS6, I can go to any auto parts store and get new wipers for less than half the price.


Hmm. Odd. I got the part numbers from the Ebay seller and ran it up to ECS tuning and they say it may not fit... Their listing does not show the RS6 at all as far as the compatible vehicles go. Is their a difference in the S6/RS6 vs. A6 windshields maybe?

Just wonder why they would say it "may" not fit, unless they are just unsure and don't know for sure.

bmlee007
September 23rd, 2014, 03:49
I won't guarantee the fitment either, I can only speak from my experience. ECS could be saying "may not" from their experience, or because they don't want to deal with returns.

The wiper motor assembly in my RS6 failed and the replacement part I got came from an A6, and my wiper arms were a straight swap to the replacement. I was going to order this same set for my RS, but just based on the ease of finding new wipers, I decided to stay stock.

If you want to test first, you can probably find a used set in a salvage yard for a few dollars.

RSoverAll
September 23rd, 2014, 04:17
Of course. I think I am going to get the new set from ECS, they have the same part according to the numbers I got from the seller, think ECS was a bit cheaper too.

SteveKen
September 23rd, 2014, 17:02
I tend to like the stock wipers with their beefiness and integrated spoilers. Plus the refills are super cheap in comparison to replacing aero-wipers all the time.

If you buy these, and want to sell your stock ones, PM me.

RSoverAll
September 23rd, 2014, 19:23
Once I pull the trigger and get the new ones installed I'll let you know.

RSoverAll
September 23rd, 2014, 21:06
SO I contacted ECS this a.m and they said they will not fit. According to the representative I spoke with he said they will be too short as the angle is not right for the RS6. The windshield on the C5 A6 with the 6 cylinder is more narrow than the 4.2 equipped C5.

Even still, a trip to the salvage yard may be in order. ECS has been wrong before.

And they list them as fitting the Allroad 4.2 but not the 4.2 A6
http://www.ecstuning.com/Search/4B1955407D/ES7039/