PDA

View Full Version : Camshaft position sensor


Dynmicracr
June 24th, 2014, 19:51
Hello All-

I got an error code:
P0348 - Camshaft Position Sensor A
Circuit High Input (Bank 2)

From my research this is on the drivers side at the back of the engine. My question is how hard is it to replace this part? I have found it on Amazon and with Prime can have it here the day after tomorrow. I have no symptoms other than the CEL. Timing belt was last replaced 10K ago.

http://www.amazon.com/Bosch-0232101024-Cam-Position-Sensor/dp/B0011ADEYM/ref=sr_1_1?s=automotive&ie=UTF8&qid=1403635307&sr=1-1&keywords=058905161B#productDetails

Thanks,

Alex
marklar182
June 24th, 2014, 21:34
Hello All-

I got an error code:
P0348 - Camshaft Position Sensor A
Circuit High Input (Bank 2)

From my research this is on the drivers side at the back of the engine. My question is how hard is it to replace this part? I have found it on Amazon and with Prime can have it here the day after tomorrow. I have no symptoms other than the CEL. Timing belt was last replaced 10K ago.

http://www.amazon.com/Bosch-0232101024-Cam-Position-Sensor/dp/B0011ADEYM/ref=sr_1_1?s=automotive&ie=UTF8&qid=1403635307&sr=1-1&keywords=058905161B#productDetails

Thanks,

Alex

back of the motor on the drivers, that is the easy one.

https://googledrive.com/host/0B-Mw25aSS849NzgzMGJhNzYtOWM4YS00YzVkLThiMDMtMTJjYmZi MTlhZDYx/CAMSHAFT POSITION SENSOR GASKET.pdf (https://googledrive.com/host/0B-Mw25aSS849NzgzMGJhNzYtOWM4YS00YzVkLThiMDMtMTJjYmZi MTlhZDYx/CAMSHAFT%20POSITION%20SENSOR%20GASKET.pdf)
Dynmicracr
June 24th, 2014, 21:58
back of the motor on the drivers, that is the easy one.

https://googledrive.com/host/0B-Mw25aSS849NzgzMGJhNzYtOWM4YS00YzVkLThiMDMtMTJjYmZi MTlhZDYx/CAMSHAFT POSITION SENSOR GASKET.pdf (https://googledrive.com/host/0B-Mw25aSS849NzgzMGJhNzYtOWM4YS00YzVkLThiMDMtMTJjYmZi MTlhZDYx/CAMSHAFT%20POSITION%20SENSOR%20GASKET.pdf)

Thats what I love to hear. Thank you!