Ran At The Track With O.c.t Chip And Milltek Exhaust

[Fast One]

HI GUYS,today my dad and i finally ran at the track with the o.c.t chip,diverter valves and milltek exhaust on the rs6,at atco racewayin nj .My dad ran five runs and i ran two runs
My dad ran:

12.41@111.48 60'-1.82
12.42@111.77 60'-1.83
12.52@109.97 60'-1.80
12.63@111.08 60'-1.97
12.67@110.24 60'-1.91

i ran:

12.58@111.95 60'-1.97
12.56@110.03 60'-1.90

a few months ago we ran stock with just the milltek exhaust and we ran:

13.41@105.32
13.74@102.57
13.71@102.80

Special thanks to stratmosphere-bob and pete
and special thanks to the crew at speedtechnik,mitch,pete,brian and andy.

p.s still looking to race an E55:D

[Erik]

Looks like the old man is faster ;)

Quite good times.

To do mid 12 second runs in a (huge) car like the RS6 is not bad at all.

When you find that E55 tell us how it went. With a mid-12 you should have a good chance!

[Klint]

Originally posted by Erik
Looks like the old man is faster ;)

Quite good times.

To do mid 12 second runs in a (huge) car like the RS6 is not bad at all.

When you find that E55 tell us how it went. With a mid-12 you should have a good chance!

I agree...

I think one m5 owner managed to get a 11.95 without any mods! That's the benchmark to beat. :eek:

[Erik]

11.95... I don't think so.

With an inaccurate G-Tech perhaps...and slicks!

Did some searching:
http://www.m5board.com/vbulletin/showthread.php?t=37572&highlight=quarter+mile+m5

"12.98@107.15
This is by far the best run I have ever seen on my G-tech."

And...this is a Hohenester chipped RS6 - stage 1.
However this G-Tech version is not the most exact of things, but it gives a hint.

http://www.rs6.com/gfx/articles/008o-l.jpg

http://www.rs6.com/articles/008.html

[Klint]

ooops, My bad.

I must of mistook the times with some other times from elsewhere, probally from the R32 TT 1/4mile.....

I was refering to M5board member ELEVENS, who's had the fastest 1/4 miles time(s) with a standard M5.

This was a time of 12.861 seconds.
http://www.m5board.com/vbulletin/showthread.php?s=&threadid=31288

Looks like the chip allows the Rs6 to beat the M5 in this test! :D

[Fast One]

Erik i didnt want to make my dad feel bad so i made sure to run slower than him:D ...........................


at the track i asked around if any E55 have run at the track,and they told me they saw one run 12.5,so i think i have a good chance :) .....................btw at the track a couple of months ago i saw an S600[twin turbo V12]running 12.2 with a chip.the owner told me he ran 12.5 stock,so that would also be a close race:incar: .................although some guys have gotten into the elevens with chip and drag radials :eek:

[AvusRS6]

:vsad2: :vsad2: :vsad2:

I miss my BEAST!!!!!!!!!!!!!

Wow, a whole second off the 1/4, that's impressive. I felt that the car was noticeably faster with Chip and exhaust!

The E55 running 12.5, IMO probably had a hard time hooking up. I would think on a moving start the E55 is faster.

[ming 2.7t]

[QUOTE]Originally posted by Fast One
[B]HI GUYS,today my dad and i finally ran at the track with the o.c.t chip,diverter valves and milltek exhaust on the rs6,at atco racewayin nj .My dad ran five runs and i ran two runs
My dad ran:

12.41@111.48 60'-1.82
12.42@111.77 60'-1.83
12.52@109.97 60'-1.80
12.63@111.08 60'-1.97
12.67@110.24 60'-1.91

i ran:

12.58@111.95 60'-1.97
12.56@110.03 60'-1.90

Man he had outstanding 60' times!! I would kill for a 1.8. Best ever was a 1.981 most are 2.05-2.11 for me.(A6 Tip)
Do you happen to have the other split times?? 330, 1/8 time and mph??
IMpressive, well done

[Audihead]

Fast one, how good is the Milltek system? Is it easy to put on? Any problems? Would like to know as I am considering one for my S4V8. Any input would be much appreciated. Thanx.
:s4addict: -Bimmerhead

[ming 2.7t]

You going through Stratmosphere for the Miltek?? If so talk to Bob or Pete and say Joe (A6)sent you, it may double the price : ) j/k. Might help you save a buck or two.

[Audihead]

Originally posted by ming 2.7t
You going through Stratmosphere for the Miltek?? If so talk to Bob or Pete and say Joe (A6)sent you, it may double the price : ) j/k. Might help you save a buck or two.

Joe, sounds like they did ya proud, do you like your system? Anything to report? Good or Bad. I am a very cautious about add- ons or performance mods. I like proven and time tested things. I would be very thankful for any input you may have. Have a great holiday season.
:s4addict: -Bimmerhead

[ming 2.7t]

The Miltek for my A6 is good quality. Sound was almost like stock, till you started to hit the gas hard. Then it was almost like stock but from the outside, you knew something was not stock. A very quiet system. Cat back is what I have and it did open the car up, in the higher rev's. I have the DP's shipping out to me this week to finish off the system.
I cannot tell you what they sound like on a RS6, but if they hold to the past history, it will be good quality, kinda quiet, and will compliment the car nicely.
Strat is a good place to get them. Bob(we call him evil Bob, cause we end up spending money on mod stuff) is a good person and they will do you right.
On the other side, some A6 people have had great success having custom catback systems made for 2/3's the price. I still went with the Miltek and Strat.
I hope the DP's are as nice as the exhaust is!! If so, I'll be a happy camper.

[Fast One]

Hi bimmerhead,the milltek on the rs6 sounds awesome,an exotic growl,but not too loud.I would imagine it would sound great on the new S4V8...........................................avu s you might be right about a race from a roll,cant wait to race one[E55]:bang: Bob from Stratmosphere told me that o.c.t is making a chip for the tranny,so that should help in the quarter mile.Also thinking about downpipes and high flow cats,milltek just came out with that setup.

[Ming]joe here are the rest of the numbers
RUN1 RUN2 RUN3
330' 5.214 5.386 5.216
1/8 8.016 8.205 8.063
MPH 88.35 88.12 87.80
990' 10.319 10.329 10.403
RUN4 RUN5 RUN6
330' 5.217 5.397 5.319
1/8 8.032 8.195 8.130
MPH 87.80 88.35 87.91
990' 10.336 10.495 10.446


RUN7 330' 5.400
1/8 8.238
MPH 87.28
990' 10.56

[Audihead]

Thanks for all the input guys. It helps to talk to others instead of just reps trying to sell something. Hope the Holidays find you all happy and safe.
:s4addict: -Bimmerhead

[Speed Technik]

11.88 at 117 with the addition of a tip chip.

[Erik]

Originally posted by Speed Technik
11.88 at 117 with the addition of a tip chip.

11.88 secs and 117 mph (188 km/h) is an excellent time for an RS6!

Do you have the actual paper? Or is it G-Teched?

:addict:

[Speed Technik]

Have the slip somewhere in Mitch's house. Prior to tip chip, we ran a bit better than Fast One.

[Erik]

Brian, that's ~520-530 hp according to 402m.com.

[nyrs6]

you said you ran at atco when didi u run
i heard they are also makeing downpipes and cats what do you think it will run then[

[Speed Technik]

We will be getting the DP's in soon and let you guys know. If S4's are any indication, it should be good but you will need a software update it looks like.

Brian

[EternalX]

what kind of launching technique did you use to get 11s with those mods?

also, in order to install the downpipes you must remove the engine correct? thats a pretty hefty labor charge if you dont know people.

[Finnus]

Does anyone have the 0-60 times with the various mods

1) Milltek, diverter valves and OCT chip
2) 1) plus tip chip

Thanks,

Finnus

:addict:

[Speed Technik]

Around 4.2-4.4, pending on driver foot etc....Brake boosting could yeild different numbers.

[Finnus]

Thanks, Brian. Lookout AMG!

Finnus

:addict:

[nyrs6]

yep amg u hear watch out rs6 is coming :incar:

btw speedtechnik englishtown raceway opens febuary 28,29
staurday and sunday maybe come down and run at the track with the rs6 hopefully u should have the dps in and tip chip and see what it runs and all other rs6 owners in the area maybe have a meet:race:

[EternalX]

so you dont know how to install downpipes then?

[Aronis]

Originally posted by Speed Technik
Around 4.2-4.4, pending on driver foot etc....Brake boosting could yeild different numbers.

Just what is the stock number then?

4.3 or not?

Mike

[Marcus Frost]

There seems to be a significant discrepancy here between your two cars, even if the ETs are similar.

The difference between a 111mph and 117mph trap speed is HUGE! The 111mph trap speed is kind of disappointing for a chipped/exhaust RS6, which makes it slightly less powerful than a stock W211 E55 AMG. Still quick, but far from an E55 killer which is something I know the RS6 has the potential to be. However the 117mph trap speed from Speed Technik is insane! I need to see a slip for that, because that is a flying trap speed for a 4 door sedan like the RS6.

-m

[nyrs6]

yes indeed the magizines got 117 on the amg but that is not real trap speed that they have at the trackwhat they have at the track is the average speed for the last 60 foot and mags do it at the end of the quarter of the mile.
so that could make a 3-4 mph difference. so its pretty close because most e55 owners are getting 112-114 or even 115 if they get a best run. so its not that much of a diiference and by the way if u look at one of the runs it was like 111.95 so thats consedered 112 already


(btw magazines got the stock rs6 108-109 and fast one got a stock rs6 at 105 at the track so u see my point)

:race: lets go RS6

[Bauer]

Check these times out!!!

http://forums.mbworld.org/forums/showthread.php?s=&threadid=60803

[nyrs6]

Speedtechnik do u have those slips to post want to see them or u can post the g-tech print out from the computer

[nyrs6]

Anybody else ever go to the track :rolleyes: