View Full Version : VMR V702 19x9.5 et33 install
DHall1
May 4th, 2014, 04:33
No spacers
No grinding
No rubbing
http://i1304.photobucket.com/albums/s532/03RSTT/5_zps0fffb398.jpg
DHall1
May 4th, 2014, 04:40
http://i1304.photobucket.com/albums/s532/03RSTT/4_zps5ed1943d.jpg
http://i1304.photobucket.com/albums/s532/03RSTT/6_zpsf06891b4.jpg
http://i1304.photobucket.com/albums/s532/03RSTT/2_zpsdb9e2d87.jpg
That looks amazing, what size tire?
mik15
May 4th, 2014, 05:13
looks great, how much does a rim weight compared to a stock one? I'd love a set of these, really good looking....:) could you please post some more pictures, for some reason these ones seem to be distorted...
DHall1
May 4th, 2014, 06:03
255/35/19 PSS
Took some time to decide tire size. I wanted to keep the 26" tire height at all costs.
yeah, its a wide angle lens to get up close
Whats the weight?
No spacers
No grinding
No rubbing
http://i1304.photobucket.com/albums/s532/03RSTT/5_zps0fffb398.jpg
bakes
May 5th, 2014, 01:47
looks great!!!
TexasRS6
May 5th, 2014, 03:50
Looks really good! Great looking rims love that gunmetal look with that color.
DHall1
May 8th, 2014, 18:47
I was asked for a down the line shot. This is the best I have for now. Cant log into Pbucket right now so here is the attachment.
15214
Ms_RS6
May 8th, 2014, 19:33
I like!!!
Soks
June 20th, 2014, 06:06
They look great! I've been waiting for someone to install them to see if I would want them. What finish is this? Matte hyper silver, or matte gun metal? Also, have you found an Audi center cap that works?
DHall1
June 20th, 2014, 06:24
Matte gun metal
Other_Erik
June 20th, 2014, 13:40
255/35/19 PSS
Took some time to decide tire size. I wanted to keep the 26" tire height at all costs.
Is this because of the overly-detailed response I put into the definitive wheel/tire thread? :)
Those wheels look hot, mind if I ask how much it ran you? I'm not looking to dump more money into the RS at the moment (gotta fix up the Jeep), but damn those are NOICE
O_E
nene
June 20th, 2014, 20:26
Very nice. Love it.
Soks
June 23rd, 2014, 22:10
Let me know if anyone finds Audi Centercaps to fit these wheels.
marklar182
June 24th, 2014, 16:12
Let me know if anyone finds Audi Centercaps to fit these wheels.
The proper Audi factory cap would be 4B0 601 170 A - this is also the factory cap from the B7 RS4
Soks
June 25th, 2014, 05:02
The proper Audi factory cap would be 4B0 601 170 A - this is also the factory cap from the B7 RS4
That's good to know, because VMR has said the usual caps tge recommend do not work with this wheel.
lswing
June 25th, 2014, 13:05
Looks very nice! Now about those square/squeezed photos...
Carbon lip?, didn't know that, looks nice!
lswing
October 10th, 2020, 19:27
Well I'm a bit late to the party, but went to install this same (almost see below) setup today and serious rubbing. All I can figure is the Sport 4S tire is much bulkier than the PSS. Going with 10mm spacers for now, and might grind the control arm nub down some, but don't really like that idea. Thoughts?
VMR V702 19x9.5 et33 install. Only thing i did different was use a 265/35/19 as opposed to the 255/35/19 as it was recommended on another thread as a better fit by the OP, but it turns out that .4" extra width is too much with Sport 4S at least.
Looking back the 255 had a 10" width that may have fit a better over the 9.5" wide wheel...although as mentioned the 255 was going to be a stretch with the PSS so I heard.
Lovely setup though, some serious traction.
https://www.rs6.com/attachment.php?attachmentid=19340&stc=1https://www.rs6.com/attachment.php?attachmentid=19341&stc=1https://www.rs6.com/attachment.php?attachmentid=19342&stc=1
lswing
October 24th, 2020, 19:39
I ended up swapping back to the 255/35/19. Michelin has a no questions 60 day exchange policy which was very quick and easy.
The 265/35/19 is a very bulky tire, even at .3 to .4 inches taller and wider it's a huge difference. With the 10mm spacers it did fit but just looked a bit goofy to me, and the higher sidewalls were a bit soft under cornering. I probably could have got rid of the spacers after grinding down the control arm nub, but still felt it was too much rubber for the car.