Miro 111 Wheels

[Soks]

I have a 2003 RS6 and I'm planning on purchasing a set of Miro 111's for the car. I'm hoping to not mess up the order, so I wanted to clarify some fitment questions from those running the wheel. I want to run 19"x9.5" at all corners. And I've read around that I will need 15mm spacers all around to clear the brakes. When ordering, do I get the wheel with the specs: (19 x 9.5 5 x 112 ET:40 57.1)

Thanks for your help,
Matt

[nitrorocket]

Ideal total offset needs to be 30mm. Otherwise, those will work. :)

[repda503]

I run the Miro 111's as well. Your specs are correct. I have 15mm spacers to make it ET25 which in my opinion is perfect. I did have to roll my front fenders because I got slight rubbing but that might partly be because I was sitting slightly lower with PSS9 suspension.

[Soks]

Thanks a lot for the input guys. That helps alot. @repda503 this is the exact setup that I am planning on running. I've sent you a PM to get some more information if that's OK?

[lswing]

repda has a great photo thread that I'm a bit jealous of.....nice setup for sure!

[nitrorocket]

If you dont want spacers, there are other similar wheel options.

[repda503]

Thanks lswing. I'm on the hunt for new wheels now though. Yes it is an addiction :)

[Soks]

Hey guys, I just wanted to make sure that the 15mm spacers clear the front brakes on the RS6? My local shop said that a friend of there's put the same wheels on an Allroad and needed 20mm spacers to clear the brakes? Could this simply be the difference in the two cars?

[repda503]

Yes they do. Effective Offset is ET25.

[JSRS6]

Yes they do. Effective Offset is ET25.

How low are you sitting? Any center hub to fender measurements? Bilstein warranty is sending me two new front main springs because they were getting spring twist because I was sitting too high, if you can believe that. So I will have to play with suspension ride height this week.

[Soks]

Actually, right now I am bone stock. I plan on getting coilovers soon to drop it all around and then add the mirro wheels. I'm just trying to get all my ducks in a row before buying all this stuff.

[ttboost]

I ran 19x9.5 all around with a ET29...no spacers,,,,it fit fine.

[Soks]

I ran 19x9.5 all around with a ET29...no spacers,,,,it fit fine.

Were you running Miro 111 wheels? Because I don't see that ET offered? If you were not running those wheels, I'm assuming it totally depends on the wheel design as far as clearing the brakes. No?

[ttboost]

Were you running Miro 111 wheels? Because I don't see that ET offered? If you were not running those wheels, I'm assuming it totally depends on the wheel design as far as clearing the brakes. No?

Sorry, no Miro's....Volks..VR G2's...and yes...I think wheel manufacturer makes a difference..

[repda503]

How low are you sitting? Any center hub to fender measurements? Bilstein warranty is sending me two new front main springs because they were getting spring twist because I was sitting too high, if you can believe that. So I will have to play with suspension ride height this week.

My center hub to fender is 13" exactly. 25" from fender to ground. That is on OEM wheels/tires.