PDA

View Full Version : What is this part #? Shift Cable Locking Clamp.......



Beardown1
January 15th, 2014, 03:21
It is # 3 in the pic below. I had to dremel mine open to release the shifter cable prior to the engine/tranny pull and am having a hard time finding a replacement. Any help would be much appreciated!!

P.S. Not the smartarse kind that tells me I need to do the 6MT conversion either :nana:

14742

905084
January 15th, 2014, 03:28
Ummm...

A) Why did you disconnect it there.??

B) I think I have an extra....

Bigglezworth
January 15th, 2014, 03:31
where the heck is that? I didn't have one of those when I disconnected my shifter? The shifter linkage just popped off at the multiswitch on the drivers side?? Bitch to get back on, but easy to remove....

RAUDI
January 15th, 2014, 04:00
I think you're talking about part 21 on the drawing. It comes as an assembly called "kit for the electromagnet"

If I'm right, then it is part# 4B0 798 151 N

Here is the link to ETKA. (you'll have to use Google Chrome and have it translated from Russian to English)

http://vin-online.ru/etka.php?vag=AU&rgn=RDW&mod=RS6&year=2003&kat=290&gr=71315

Hope this helps.

Beardown1
January 15th, 2014, 04:04
For the life of me I could not get the ball socket to come of from the front of the transmission. After hours of frustration I removed the bottom cover of the shift mechanism and went that route instead........seemed like a good idea at the time.

Beardown1
January 15th, 2014, 04:08
I saw that diagram on vagcat.com and at first thought it was #21 as well, but after investigating further I don't think that is it. I mean.....it is just a plastic end piece not an electromagnetic flux capacitor.

905084
January 15th, 2014, 04:15
For the life of me I could not get the ball socket to come of from the front of the transmission. After hours of frustration I removed the bottom cover of the shift mechanism and went that route instead........seemed like a good idea at the time.

I know I have the part you need. You're welcome to it, as soon as I can find it. A cursory check of the barn and garage and I didn't see it, but I know it came with the trans I bought.

Beardown1
January 15th, 2014, 04:27
That would be amazing and a very generous offer. Thanks 90210!! Just PM me your paypal address and I would be more than happy to give a little something........you know.......for the effort.

905084
January 15th, 2014, 04:44
That would be amazing and a very generous offer. Thanks 90210!! Just PM me your paypal address and I would be more than happy to give a little something........you know.......for the effort.

I'll look tomorrow....cause I know I have it, and would love it out of the shop.

905084
January 15th, 2014, 19:48
Which piece? Pin and clamp/collar?

14752

Beardown1
January 15th, 2014, 22:13
It's the black plastic piece (and bushing) that is circled in red.

905084
January 15th, 2014, 22:40
It's on my kitchen table.....pm me your address and I'll send it tomorrow.

14754

Beardown1
January 15th, 2014, 23:06
pm will be sent shortly............thanks a million! I certainly owe you one.