H&R/Koni front - raise 1/4"?

[kismetcapitan]

so I've got the H&R spring and Koni shock combo that I installed a couple years ago, and I've decided that the front is just too low. I'm otherwise quite happy with the setup - it's very, very stiff which isn't very comfortable but it inspires a lot of driving confidence.

I'd like to raise the front about 1/4" - can this be done with any type of spacer? Thanks!

[DHall1]

You could make a thicker coil spring perch. You will need about an 1/8in spacer under the spring.

[kismetcapitan]

You could make a thicker coil spring perch. You will need about an 1/8in spacer under the spring.

that's what I figured; shouldn't be too difficult to fabricate the spacer. thanks!