Which wheels do you have on your RS6 C5

[Vdub]

I want to see which wheels you are driving on..(summer and winter)
If anybody wants to buy a new set of wheels they can look inhere if its a good choice..

13312
Winter, OEM RS6 18inch 7,5J ET20 Titangrau

13313
Summer, OEM RS6 19inch 9J ET35

[Primo]

13314
Summer: 18" NITRO

13315

Winter, 18" Something


Getting new rims for sure! :)

[amanda]

Summer bridgestones

http://i514.photobucket.com/albums/t342/amandaur/9CCC1909-5E22-4347-A885-4F1510B1065E-17726-000014FE10D94EB5.jpg

Last winters but sadly too small now :( RS4 B5 18's with Hankook Ice bear winter tires

http://i514.photobucket.com/albums/t342/amandaur/079_zpse55ea4d3.jpg

[Vdub]

I had a set 18 inch replica RS6, 8J, they didnt fit beacause of to big Front Callipers..

@Amanda, i Like the red color, you don't see it that often..

[amanda]

Why Thank You, Misano red is the fastest color for an RS6 but am sure the boys might argue over this ;)

My 18's are now defunkt because of my RS6 c6 brake setup.

[Vdub]

If i had the choice between red en black or grey i would also go for red..
I like other colours then the rest..

This was my daily for 8 years..
https://lh5.googleusercontent.com/-UPYpD6d6bLk/ThSKFOP42lI/AAAAAAAAHV0/YryPhXogIOM/s912/2011-07-06%252018.10.35.jpg

[amanda]

Is that a standard color on a passat?
Nice wheels but a tad low for me ;)

[RSSIK]

Winter
http://i49.photobucket.com/albums/f260/AWDrifter02/rs6.jpg

Summer
http://i49.photobucket.com/albums/f260/AWDrifter02/2012-09-29155449_zps84873336.jpg

http://i49.photobucket.com/albums/f260/AWDrifter02/2012-09-29155433_zps806f69aa.jpg

[seaneb]

MTM Bimoto 9.5 X 19s. All year round.

133441334513346

[2000c43]

Summer


http://i49.photobucket.com/albums/f260/AWDrifter02/2012-09-29155433_zps806f69aa.jpg

These are nice looking wheels. What is the brand and size of the wheel and tire?

[ttboost]

Volk VR G2's 19x9.5 ET29, with 275/30/19 Michelin PSS. Yeah... I know..but I like a 5 or 6 spoke light wheel...

1334713348

[Vdub]

@amanda

Yes, its called Futura Yellow, was a special color in 99-00 on Bora/Jetta Golf and Passat

[RSSIK]

Thanks. My wheels are Miro 111 19x9.5 all around. I only did h&r lowering springs just for now because Audi just replaced my whole DRC system under recall. Also to make sure it is flush i used 15mm spacers with longer lugs on each wheel.



These are nice looking wheels. What is the brand and size of the wheel and tire?

[Elevens]

Hey RSSIK fine looking example man. Love the Color.

Rotiform Mia's 19x10 ET35. True color is silver, been photoshoped to a semi-gloss Titanium color I would like to have....................


http://i831.photobucket.com/albums/zz237/vintron/P1010535A.jpg

[ben916]

Volk VR G2's 19x9.5 ET29, with 275/30/19 Michelin PSS. Yeah... I know..but I like a 5 or 6 spoke light wheel...

1334713348

How much lighter versus OEM?

[ttboost]

Don't recall exactly, but I remember that I am 10lbs lighter per corner with the overall change including tires and wheels. I seem to recall the Volk wheels weighing 20-21lbs each. stock wheels were like 30lbs? Tires might have been close to a wash? Went from Continental 255/45/18 to Michelin PSS 275/30/19. I'll try to weight them again tonight and check back in...

[Jimmy]

http://imageshack.us/a/img29/7082/img2195q.jpg
19x9 et29 OE RS4 with 255/35/19 Yokohama Advans for now, Hankook V12s this spring along with a DRC removal to 4.2 Konis/H&Rs...I run these all year round ; tho I don't drive it in the snow/winters much anymore.

The OE 18x8.5s 9 spokes are on the allroad with Blizzaks, that is my snowmobile.

[4.2Crew]

19 x 9.5 VMR V713 & 265 PSS's

13392

[905084]

RSSIK, love the whole look of your RS. How do you like the ride on the H&R setup? I've got it on my A6 and find it a bit stiff for the roads around here.

[Thor]

Mine.....13395 Stock yes, but I think it looks very nice.

[Dynmicracr]

VMR with Continental DWS (275/30/19)

http://farm9.staticflickr.com/8176/7994422222_fd69c72782_b.jpg

[2000c43]

Does anyone know how big of a spacer you can put on with the stock 18" wheels and tires before you get into rubbing issues? Seeing all of the great wheels on this thread are temping but with relatively new tires on my stock 18" wheels, I think I will have them for a bit longer. A small spacer would give the car a slightly more aggressive look and would be an easy and inexpenisve upgrade.

[4.2Crew]

Does anyone know how big of a spacer you can put on with the stock 18" wheels and tires before you get into rubbing issues? Seeing all of the great wheels on this thread are temping but with relatively new tires on my stock 18" wheels, I think I will have them for a bit longer. A small spacer would give the car a slightly more aggressive look and would be an easy and inexpenisve upgrade.

If I had to make an educated guess?.... Probably 10 - 12.5mm spacers. I'm running 15mm spacers on 19x 9.5" wide Summer wheels with a 45et.

IF you decide to go with spacers, I'd highly recomend a wheel centric AND hub centric spacer.

[tantheman]

RSSIK - I second the great look of your car. My car would like to be like yours when it grows up;). Where did you get you H&R springs installed on the DRC?

[Dynmicracr]

I am not running any spacers on mine above. But if you do definitely get hub centric spacers if you have to run them.

[ttboost]

If you have to or want to run spacers, I think you need to run hub centric no matter what...

[Dynmicracr]

If you have to or want to run spacers, I think you need to run hub centric no matter what...

Not true. There are lug centric and hub centric. Lug centric are very easy to get. Hub centric are usually specific the the car or model.

[ttboost]

Not true. There are lug centric and hub centric. Lug centric are very easy to get. Hub centric are usually specific the the car or model.

Yes, I agree, BUT, if the car is hub centric, (like ours) it is IDEAL to keep it that way. If not, you will be relying on the lug bolts to center your wheel (with the spacer). I'm not sure how well the lug bolts fit the wheel and whether you want to rely on that, but I guess it IS a personal preference...

[4.2Crew]

.....BUT, if the car is hub centric, (like ours) it is IDEAL to keep it that way. If not, you will be relying on the lug bolts to center your wheel (with the spacer). I'm not sure how well the lug bolts fit the wheel and whether you want to rely on that, but I guess it IS a personal preference...

I totally agree... AND, my personal preference was to have custom spacers made by http://www.motorsport-tech.com which are hub centric AND wheel centric....

[Dynmicracr]

I think we are all saying the same thing here guys. If you have to run centering rings. Do it right.

[Vdub]

i ALWAYS use H&R spacers, at 10mm the center hub is also on the spacers.
http://sphotos-a.ak.fbcdn.net/hphotos-ak-ash3/543882_289504757819972_306257113_n.jpg

[bakes]

Kismecaptain is running 10mm spacers and factory 18's...read below

http://www.rs6.com/showthread.php/24403-definitive-tire-wheel-and-offset-thread?highlight=spacers (http://www.rs6.com/showthread.php/24403-definitive-tire-wheel-and-offset-thread?highlight=spacers)

[bakes]

Oh, I'm running 19*10 Forgestar F14, 275/30/19's in the summer and factory 18's in the winter! And before people say...in this pic I had just raised the front suspension getting ready for my winter ride height!

http://i5.photobucket.com/albums/y173/gregbaker/Picture001.jpg

[2000c43]

bakes...I saw that post but I noticed that Kismecaptain states that he uses 10mm spacers with "rolled fenders" and I was thinking of getting some spacers that do not require any modificaiton to the car.

[2000c43]

bakes...that is a nice looking front splitter...what is the brand?

[Vdub]

bakes...I saw that post but I noticed that Kismecaptain states that he uses 10mm spacers with "rolled fenders" and I was thinking of getting some spacers that do not require any modificaiton to the car.

It depends on the J and the ET size of the wheels..

[bakes]

It depends on the J and the ET size of the wheels..

I assumed we are talking about the factory 18's

[bakes]

bakes...that is a nice looking front splitter...what is the brand?

Front splitters were custom made by the previous owner ( headshot who did most of the updates to the car). I had them off last year when I had them clear bra'd and offered to get some made but there wasn't a lot of interest. I like em!!!

[Elevens]

I totally agree... AND, my personal preference was to have custom spacers made by http://www.motorsport-tech.com which are hub centric AND wheel centric....


Nice find 4.2Crew. Just what I've been looking for, Custom Spacers at a decent price. I have to use Hub centric rings on my wheels to adapt the cars 57.1mm hub to to the wheels 66.1mm Bore. Apparently this company will make the spacers to your desired spec, so my wheels will fit without the need for Hub Centric Rings and consequently less possible Wheel Vibration. Can't attest for the quality, but I am going to find out...........................

[4.2Crew]

Nice find 4.2Crew. Just what I've been looking for, Custom Spacers at a decent price. I have to use Hub centric rings on my wheels to adapt the cars 57.1mm hub to to the wheels 66.1mm Bore. Apparently this company will make the spacers to your desired spec, so my wheels will fit without the need for Hub Centric Rings and consequently less possible Wheel Vibration. Can't attest for the quality, but I am going to find out...........................

As for the quality.... The Adaptec spacers look like jewelry! And fit absolutely perfectly! With my Summer VMR 713 set-up using 15mm spacers, the wheels are as smooth as butter from 0-150mph+. Just say'n!

[Elevens]

As for the quality.... The Adaptec spacers look like jewelry! And fit absolutely perfectly! With my Summer VMR 713 set-up using 15mm spacers, the wheels are as smooth as butter from 0-150mph+. Just say'n!

Glad to hear that, I'll definitely be taking that route...............................

[Kgnast]

OEM RS6's shall remain the winter wear. Summertime/show stuff, I have a set of BBS LM 20"S from my 4.2 which were not on that car when the storm hit. They'll be going on the RS6 come spring. Tires are Yokohama AVID's. Rim weight is about 25lbs. Not sure what the tires are as I haven't weighed those.

I have Michelin Pilot Super Sports on the OEM rims. Loving these tires.... fantastic tires. I'd love to land a set of ADV1's or some D2Forged. Probably what the next move is as far as wheels go, and I'll unload the LM's. Eh, we'll see. The LM's can be seen in my album on my old NEMO4.2.

[johnnie27]

19x9.5 Et 30 255/35/19 Kw V3
impossible for me to go wider or bigger with this ride height
full brushed alloy centres and lips...
13460134611346213463forged specialties

[Primo]

What rim size can you put on a standard RS6 anyway?

22"x8,5?

[audib4]

PEEEELLLERS
http://i200.photobucket.com/albums/aa246/audib4/DSC_0531_zps6d73d0fb.jpg
http://i200.photobucket.com/albums/aa246/audib4/DSC_0534_zps9de3c7c2.jpg

[Elevens]

Don't know what Wax you have on that thing, but she's looking SWEET. Beautiful car audib4. Absolutely Love it.......................

[audiprotn]

What suspension is this?

[audib4]

Thank you Elevens, this is OEM DRC on Audi A6 4.2 H&R Race Springs, the rear is a bit higher usually, I had a passenger in the back seat and a suitcase in the trunk.

[audiprotn]

Looking really nice!!!

[ben916]

PEEEELLLERS
http://i200.photobucket.com/albums/aa246/audib4/DSC_0531_zps6d73d0fb.jpg
http://i200.photobucket.com/albums/aa246/audib4/DSC_0534_zps9de3c7c2.jpg

the more I see PEELERS, the more they are growing on me!
clear corners = nice!
glossy coat = amazing!
DRC!?!? = who woulda thunk that?!?!
smoked tails = no bueno (kinda like having a silencer on a .50 BMG)

[Primo]

That is one gorgeous beast! Thanks for posting! Rim size?

[RSSIK]

RSSIK, love the whole look of your RS. How do you like the ride on the H&R setup? I've got it on my A6 and find it a bit stiff for the roads around here.

905084, Thank you very much. I get compliments all the time even muscle car guys give me compliments because of my exhaust system. Its amazing. I absolutely love the suspension. It is very comfotable to me and i never have any complaints whatsover on ride from myself or others. I am actually using the a6 4.2 race spring setup because it wasnt available for the rs6.

[RSSIK]

Thank you very much appreciated. I actually had DISCOPOTATO install them for me in my shop. If you want to bring it down I know hell gladly do the same for you.


RSSIK - I second the great look of your car. My car would like to be like yours when it grows up;). Where did you get you H&R springs installed on the DRC?

[gregoryindiana]

Abt 19 for summer. I like the 5 spoke look; would have considered Euro OE 19s but they were too hard to find.

I have a pretty good pic of the car with the OEM 18s for the US, which I use for winter.

[nene]

Not my car, but found this RS6 with 19" Lorinser wheels.

13483

13484

[nene]

My Winter setup still in 2013... Volk Rays Progressive TE (19x8.5 all around) ... kind of interesting as I love Trance & Progressive tracks.


http://www.htms.org/img/022003/ProgressiveTE/ctownprogressivete3lg.jpg


http://www.htms.org/img/022003/ProgressiveTE/ctownprogressivete4lg.jpg

[nene]

Not my vehicle, but found some 19" or 20" Sportec love all over an RS6...

13485
13486
13487
13488
13489

[nene]

My old Summer setup, Volk Rays LE (19x9.5 Rear, 19x8.5 Front). Long gone to an RS4 owner in the South. I miss you ladies!
Had to sell them after the massive brake upgrade, as I needed front and rear spacers, and it killed my rear American Hot Rod look (j/k).

http://www.htms.org/img/022003/summerctown/DSC_5926.JPG

http://www.htms.org/img/022003/summerctown/volks1lg.jpg

http://www.htms.org/img/022003/summerctown/volks2lg.jpg

http://www.htms.org/img/022003/summerctown/volks4lg.jpg

http://www.htms.org/img/022003/summerctown/ctownrs63.jpg

http://www.htms.org/img/022003/summerctown/ctownrs64.jpg

http://www.htms.org/img/022003/summerctown/ctownrs65.jpg

http://www.htms.org/img/022003/summerctown/ctownrs67lg.jpg

[RS6puma]

Hello...hope you can help :)
I've been tempted every so often to explore putting 19" rims/tires on my Beast...but my Audi dealer RS6 mechanic persuades me against it, claiming good chance of problems e.g rubbing etc...as well as the claim of a rougher ride on non-perfect local roads. With that said...who have you found to perform the work in NJ...? I am in S.CT and can't source any RS6 specialists locally. Thanks in advance.

[v8a6]

My car is an A6 4.2, and obviously not an RS6. Anyway, the cars look similar enough that it should give you a good idea what the specific wheel styles will look like on an RS6

Zenetti 20x10
http://gp1.pinkbike.org/p4pb8859261/p4pb8859261.jpg
http://gp1.pinkbike.org/p4pb8859263/p4pb8859263.jpg
http://gp1.pinkbike.org/p4pb9356080/p4pb9356080.jpg
http://gp1.pinkbike.org/p4pb8859269/p4pb8859269.jpg

R8 v10 reps 19x8.5
http://gp1.pinkbike.org/p4pb9356067/p4pb9356067.jpg
http://gp1.pinkbike.org/p4pb9356048/p4pb9356048.jpg

OEM RS4 19x9
http://gp1.pinkbike.org/p4pb8717613/p4pb8717613.jpg
http://gp1.pinkbike.org/p4pb8717609/p4pb8717609.jpg

Axis S5F 20x9.5 F 20x10.5 R
http://gp1.pinkbike.org/p4pb8548908/p4pb8548908.jpg
http://gp1.pinkbike.org/p4pb7718362/p4pb7718362.jpg
http://gp1.pinkbike.org/p4pb7718360/p4pb7718360.jpg
http://gp1.pinkbike.org/p4pb8228496/p4pb8228496.jpg
http://gp1.pinkbike.org/p4pb8228492/p4pb8228492.jpg

20x8.5 on my previous car (dont remember the brand)
http://gp1.pinkbike.org/p4pb7693756/p4pb7693756.jpg

MB Battle 18x9.5
http://gp1.pinkbike.org/p4pb7307630/p4pb7307630.jpg

OZ Superleggera 18x8 (currently on the car)
http://gp1.pinkbike.org/p4pb9416617/p4pb9416617.jpg
http://gp1.pinkbike.org/p4pb9416613/p4pb9416613.jpg

TR Motorsports 18x8.5 (not yet installed)
http://gp1.pinkbike.org/p4pb9420569/p4pb9420569.jpg

[ttboost]

My old Summer setup, Volk Rays LE (19x9.5 Rear, 19x8.5 Front). Long gone to an RS4 owner in the South. I miss you ladies!
Had to sell them after the massive brake upgrade, as I needed front and rear spacers, and it killed my rear American Hot Rod look (j/k).

I love the look of the Volk's too..I have the black VR G2's.



Hello...hope you can help :)
I've been tempted every so often to explore putting 19" rims/tires on my Beast...but my Audi dealer RS6 mechanic persuades me against it, claiming good chance of problems e.g rubbing etc...as well as the claim of a rougher ride on non-perfect local roads. With that said...who have you found to perform the work in NJ...? I am in S.CT and can't source any RS6 specialists locally. Thanks in advance.

Where in CT? There are a few places around. What do you need? MANY here, like myself are running 19x9.5 wheels just fine, with no spacers.

[Jimmy]

19x9 RS4 rims here with 255s...no issues and the ride is pretty good for CT roads IMO.http://imageshack.us/a/img29/7082/img2195q.jpg (http://imageshack.us/photo/my-images/29/img2195q.jpg/)

[RS6puma]

Where did you get them installed? Not exactly comfortable with a Town Tire doing this. Also...would any Audi 19 x 9 rims fit...in theory? I like those rims although find it funny it came from a rs4...but, trust me I am not knowledgeable on what owners of RS6's have done successfully. I will only do a change if it involves NO mods ie no spacers or tweaks to the fenders etc... Let me know if anyone is willing to talk live on this. Thanks!!

[v8a6]

Of all the wheels I had on my car (A6 4.2) the RS4 looked the nicest. They are a nice width and offset (et29). You will not have to use spacers with them, although I personally liked the look of them better with an 8mm spacer. However, I have also rolled my front fenders and made other mods. At stock offset, you will be fine, and will have to make no modifications.

No, not any Audi 19x9 rims will fit your car. You have to consider, bolt pattern and offset. Since the RS6 hub is 57.1 you can get hubcentric rings to convert about any rim to 57.1, if needed.

[ttboost]

^^^^^ correct...

[kilian tuning]

http://i1229.photobucket.com/albums/ee469/mavada1/IMG_0123.jpg if i ever replace them, these would be next: http://i1229.photobucket.com/albums/ee469/mavada1/img7327a.jpg

[RS6puma]

Installer recommendations in S.CT would be fantastic. Thanks!!

[ttboost]

Not sure anyone understands what you mean by "installer"? Put tires on wheels? Put wheels on car? Fairfield County Motorsports...Fairfield, CT. They work on high end cars.

[ben916]

[QUOTE=v8a6;247169]Of all the wheels I had on my car (A6 4.2) the RS4 looked the nicest. They are a nice width and offset (et29). You will not have to use spacers with them, although I personally liked the look of them better with an 8mm spacer. [QUOTE]

Hmpphfff!!!!

[Brav]

My Rotiforms Now 19x10
http://i49.photobucket.com/albums/f282/ckreidel/Audi%20RS6/IMG_20121116_181931.jpg
http://i49.photobucket.com/albums/f282/ckreidel/Audi%20RS6/IMAG2793.jpg

My Rotiforms in the past 19x10
http://i49.photobucket.com/albums/f282/ckreidel/Audi%20RS6/IMAG0142-1.jpg
http://i49.photobucket.com/albums/f282/ckreidel/Audi%20RS6/IMAG0144-1.jpg

[v8a6]

[QUOTE=v8a6;247169]Of all the wheels I had on my car (A6 4.2) the RS4 looked the nicest. They are a nice width and offset (et29). You will not have to use spacers with them, although I personally liked the look of them better with an 8mm spacer. [QUOTE]

Hmpphfff!!!!

Hey Ben! LOL. Yeah, sorry they never made it down your way when I sold them. However, shipping from Canada would have been very expensive. If I come across another set Ill let you know :)

[ben916]

No worries, there will be more popping up...
I had a line on a set in San Fran but didn't move fast enough.

[Jimmy]

Where did you get them installed? Not exactly comfortable with a Town Tire doing this. Also...would any Audi 19 x 9 rims fit...in theory? I like those rims although find it funny it came from a rs4...but, trust me I am not knowledgeable on what owners of RS6's have done successfully. I will only do a change if it involves NO mods ie no spacers or tweaks to the fenders etc... Let me know if anyone is willing to talk live on this. Thanks!!I 'installed' them in my garage with a jack and a 17mm socket wrench. Easy to find a set with tires already mounted as the Rs4 uses the same size as the C5 RS6. www.enimotorsports.com (http://www.enimotorsports.com) up in Brookfield is also a place I say you can trust to mount and balance. What's so funny about the rims being from an RS4? They rock and fit perfectly with no spacers. They seem to be pretty stout too, as far as 19" rims go, with a thin sidewall a lot of rims will take a pothole in the form of a bend. Yes, most any modern Audi rim will bolt-on...its the offset you have to be mindful of. You have to find the right fit from between a 35-25mm offset (for no spacers).

[FJC711]

13746
IM partial to these hartmann rims... but id need like at least a 20mm spacer.....

[Greyyork]

That is such a beautiful color. @RSSIK

[chrisaudi4.2]

here is my 2000 a6 4.2 with miro 111 5x120 Redrill to 5x112 19x9.5 all around with 245/35/19 front are ET20 with a 3mm spacer final ET17 Rears are ET20 with a 5mm spacer final ET15http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpBnPltmPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpBnPltmPM.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpngqYAzPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpX9Ql4KPM-1.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpX9Ql4KPM-1.jpghttp://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpbP436bPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpbP436bPM.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/phpH25DSyPM.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/phpH25DSyPM.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/qw.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/qw.jpg.html)

[mik15]

i have just installed these rims, i've always liked the way they look and i think they look good on the RS6 as well, i've seen it on other C5 RS6 and they helped me make this decision...

http://i43.tinypic.com/2432dzb.jpg

http://i39.tinypic.com/25u30hu.jpg

http://i43.tinypic.com/24b40ed.jpg

[ttboost]

Yup, RS4 wheels. Very nice!!! Had a set lined up myself, but they were banged up a little and passed...

[mik15]

these have just been refurbished by the previous owner and when we did the balancing they seemed alright, we'll see tomorrow how they feel on a longer trip, my 18" had a light rumble around 65-70mph as one is slightly bent, it's how it came with the car, i hope that with new rims i will also get rid of the that rumble...

I think the RS4 wheels make it look a bit younger and sportier, the 18 ones are too conservative, if i had found the 5 spoke RS6 ones i would've bought it, but can't find it here and buying it over the internet it's a no for me as i can't be sure that they're ok...plus the RS4 ones are plug&play, no need for spacers or center rings which i don't like....

[ttboost]

these have just been refurbished by the previous owner and when we did the balancing they seemed alright, we'll see tomorrow how they feel on a longer trip, my 18" had a light rumble around 65-70mph as one is slightly bent, it's how it came with the car, i hope that with new rims i will also get rid of the that rumble...

I think the RS4 wheels make it look a bit younger and sportier, the 18 ones are too conservative, if i had found the 5 spoke RS6 ones i would've bought it, but can't find it here and buying it over the internet it's a no for me as i can't be sure that they're ok...plus the RS4 ones are plug&play, no need for spacers or center rings which i don't like....


Yeah..I love the look of your RS4 wheels too...I would have powdercoated mine black anyway, so I got lucky with my black Volk VR G2's, which incidently were off a RS4, so same size too...

[chrisaudi4.2]

here are a little more pictures of my bebe.lol again running miro 111 19x9.5 all 4 corners 5x120 Et20 Redrill to 5x112 with Federal 595 Evo 245/35/19 all 4 corner with a 3mm spacer in the front Final Et17.and 5mm in the Rear at a Final Et15..........the wheels are plasti dip color red......http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111706.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111706.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111790.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111790.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111787.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111787.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111796.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111796.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111797.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111797.jpg.html)http://i569.photobucket.com/albums/ss132/chrissr20det_photo/19xxx11111480.jpg (http://s569.photobucket.com/user/chrissr20det_photo/media/19xxx11111480.jpg.html)

[ttboost]

How do they not rub?

[chrisaudi4.2]

How do they not rub?
It Rub in the top screw of the front fender liner,but I Remove it.

[Primo]

Very cool, same rims as I got, except the color ;)

[ttboost]

Hmm..this is the 2nd or 3rd thread that I've seen these wheels...kinda liken 'em...

[Elevens]

Hmm..this is the 2nd or 3rd thread that I've seen these wheels...kinda liken 'em...


4 shipped to the door for $1100.00, is very enticing indeed. I wonder how good they really are? Weight and quality.................

[repda503]

Elevens, I did a little research and everywhere I read said they are very good quality for cast wheels. Weight is ~25lbs.

[ttboost]

Yeesh...heavier than I thought...

[v8a6]

Lookin good Chris

Got some 20 inch 'peelers' for the S6. Did a test fit on the A6 today. Too heavy for my RS6, but should be fine on the wagon.

http://gp1.pinkbike.org/p4pb9631462/p4pb9631462.jpg

[UrS6]

Not super light but they are cheap. It seems that there are a lot of BBS and OZ wheels that are just as heavy or heavier for 2-4 times the money. What is the weight of an equivalent VMR wheel? I'm shopping now so I'm following this. Anyone got some Sportecs for sale?
Yeesh...heavier than I thought...

[ttboost]

I like the looks of the Miro, but I'm all about performance too..and I feel I need to factor in weight also. If you are going to pay all the money for a wheel, it better have all the benefits to warrant the cost. After all, besides functionality, looks and weight, what else is there?

I chose my Volks based on looks, weight and cost...not necessarily in that order...but the light weight was a deciding factor.

[1uglymug]

http://www.m5board.com/vbulletin/e39-m5-e52-z8-discussion/173157-miro-111-vs-vmr-vb3-weight-comparison.html

VMR is another common choose. Miro 111's seem comparable by weight.

ttboost, How much do your Volk's weigh?

[ttboost]

http://www.m5board.com/vbulletin/e39-m5-e52-z8-discussion/173157-miro-111-vs-vmr-vb3-weight-comparison.html

VMR is another common choose. Miro 111's seem comparable by weight.

ttboost, How much do your Volk's weigh?

About 20lbs each.

[UrS6]

I like the looks of the Miro, but I'm all about performance too..and I feel I need to factor in weight also. If you are going to pay all the money for a wheel, it better have all the benefits to warrant the cost. After all, besides functionality, looks and weight, what else is there?

I chose my Volks based on looks, weight and cost...not necessarily in that order...but the light weight was a deciding factor.
You can't argue the fact that lighter is better but you are comparing $1000/set with $1000/wheel.

If price was no issue I'd be bumping around in a brand new 911 twin turbo.

[ttboost]

You can't argue the fact that lighter is better but you are comparing $1000/set with $1000/wheel.

If price was no issue I'd be bumping around in a brand new 911 twin turbo.

I hunted down my set of Volks for $1000 for the set... so win-win for me. I also agree with your comment on the 911 turbo. If I sell my RS6, I will buy another 911 turbo..

[bmlee007]

I'm still riding the RS4 reps that were on the car when I bought it. 18x8 et38 with a 20mm spacer. They're showing enough wear, chips, fade etc that I'll convert them for winter use this year and hunt down a nice set for summer.

13901139021390313904

[Primo]

If you guys ever wondered how a Avant C5 would look with Miro 111's, here's the answer! :)


http://i29.photobucket.com/albums/c292/anleggskaill/IMG_3606_zpsd8fda0ee.jpg (http://s29.photobucket.com/user/anleggskaill/media/IMG_3606_zpsd8fda0ee.jpg.html)

http://i29.photobucket.com/albums/c292/anleggskaill/IMG_3601_zpsa1d2bca8.jpg (http://s29.photobucket.com/user/anleggskaill/media/IMG_3601_zpsa1d2bca8.jpg.html)

http://i29.photobucket.com/albums/c292/anleggskaill/IMG_3604_zps7efb3ebc.jpg (http://s29.photobucket.com/user/anleggskaill/media/IMG_3604_zps7efb3ebc.jpg.html)

http://i29.photobucket.com/albums/c292/anleggskaill/IMG_3615_zpsb3663228.jpg (http://s29.photobucket.com/user/anleggskaill/media/IMG_3615_zpsb3663228.jpg.html)

http://i29.photobucket.com/albums/c292/anleggskaill/IMG_3614_zpsbf6e9297.jpg (http://s29.photobucket.com/user/anleggskaill/media/IMG_3614_zpsbf6e9297.jpg.html)

Miro/Zito 111's 19x8,5 + 5mm spacer front and 19x9.5 +25mm spacer rear. Tires: Toyo Proxes T1.

[v8a6]

If you guys ever wondered how a Avant C5 would look with Miro 111's, here's the answer! :)


That combo looks AMAZING!

[Primo]

Thanks alot. :)

I didn't want too much tirewidth because of the shitty roads in Norway (I work there) -,-

[mi021le]

summer... winter... 3rd jersey. :p
http://i960.photobucket.com/albums/ae85/mi021le/DSC_2100-002.jpg

[DHall1]

The best wheel graveyard pic ever.

[ttboost]

Wasteland of wheels...

[Smiler]

Nice Primo :)
You need to adjust the exhaust though ;)

[lswing]

Nice Audi's and wheels...congrats....

[Primo]

Nice Primo :)
You need to adjust the exhaust though ;)

I do indeed, thanks ;)