View Full Version : quick question on fixing leaky ICs...
makaveli42
September 30th, 2012, 22:59
ive looked at the 2 DIYs i found...but neither of them say where to get the end cap to seal off the pipes of the intercooler? what is the size and where can i buy them. All i can find is this...http://www.siliconeintakes.com/product_info.php?products_id=162
any help is greatly appreciated
marklar182
October 1st, 2012, 00:12
You can make your own with plumbing supplies from home depot. Oatey caps are the plugs most use.
kday
October 1st, 2012, 01:53
Or you can leave the hoses attached and find "male" plugs vs "female" caps. I just used random bits lying around my garage:
http://blog.ultrameta.org/wordpress/wp-content/uploads/2012/02/DSCF0095-1024x679.jpg
SFJ_RS6
October 1st, 2012, 19:06
Here's the IC test setup I put together, all parts from Home Depot. I don't remember exactly, but think I've got less than $25 - $30 in the pieces.
Steve
12992
makaveli42
October 2nd, 2012, 00:21
nice! thanks guys!
905084
October 2nd, 2012, 01:42
Can do it all with Home Depot parts but a word of caution....make sure the cover is not pointed at you when you pump it up. If you go 10 psi on a 2 in diameter pipe you are at 30 pounds of pressure and it lets loose it is a little startling.
fly5150
October 3rd, 2012, 18:28
what PSI are you guys testing to?