Can someone tell me how to log on VAGCOM? I'm having some problems.

[UrS6]

I'm not too good with VAGCOM and searched a little about logging. What channels do I log while driving?

The problems I am seeing:

17125 Torque convertor code

17963 Charge pressure

17861 Exhaust temp sensor 1 open or short

17865 Exhaust temp sensor 2 open or short

Also I have several readiness blocks that failed

I have a Unitronic tune. My intercoolers have a little oil seepage so they may be leaking a little.

A log:

Monday,03,September,2012,12:<wbr>18:52:26227
VCDS Version: Release 11.11.4
Data version: 20120807

------------------------------<wbr>------------------------------<wbr>--------------------
------------------------------<wbr>------------------------------<wbr>--------------------

Address 01: Engine Labels: 077-907-558-BCY.lbl
Control Module Part Number: 4D1 907 558 C
Component and/or Version: 4.2l V8/5VT G 0001
Software Coding: 0006752
Work Shop Code: WSC 78901 281 394790
VCID: 2E4E19BCBA713668839
2 Faults Found:
17861 - Exhaust Gas Temp Sensor 1 (G235)
P1453 - 001 - Open or Short to Plus - Intermittent
17865 - Exhaust Gas Temp Sensor 2 (G236)
P1457 - 001 - Open or Short to Plus - Intermittent
Readiness: 0000 0000
------------------------------<wbr>------------------------------<wbr>--------------------
------------------------------<wbr>------------------------------<wbr>--------------------

Address 01: DTCs clearedMonday,03,September,<wbr>2012,12:24:11:26227
VCDS Version: Release 11.11.4
Data version: 20120807

Address 01: Engine (4D1 907 558 C)
12:24:07 Group 001: General
760 /min Engine Speed (G28)
87.0°C Coolant Temperature (G62)
3.9 % Lambda Control Bank 1
7.0 % Lambda Control Bank 2
12:24:07 Group 002: General
760 /min Engine Speed (G28)
16.5 % Engine Load
2.39 g/s Mass Air Flow (G70) Bank 1
3.36 g/s Mass Air Flow (G246) Bank 2
12:24:07 Group 003: General
760 /min Engine Speed (G28)
5.75 g/s Mass Air Flow (G70 + G246)
1.6 % Throttle Valve Angle
13.5 °BTDC Ignition Timing Angle
Monday,03,September,2012,12:<wbr>25:27:26227
VCDS Version: Release 11.11.4
Data version: 20120807

Readiness Status: 0110 1101
Exhaust Gas Recirculation: Passed
Oxygen Sensor Heating: Failed or Incomplete
Oxygen Sensor(s): Failed or Incomplete
Air Conditioning: Passed
Seconday Air Injection: Failed or Incomplete
Evaporative Emissions: Failed or Incomplete
Catalyst Heating: Passed
Catalytic Converter(s): Failed or Incomplete

Monday,03,September,2012,12:<wbr>48:08:26227
VCDS Version: Release 11.11.4
Data version: 20120807

------------------------------<wbr>------------------------------<wbr>--------------------
------------------------------<wbr>------------------------------<wbr>--------------------

Mode 01 - PID 01 : Readiness -- Address 10
Number of DTCs stored: 0 -- MIL Status: MIL OFF
Misfire monitoring: Passed
Fuel System: Passed
Comprehensive Components: Passed
Catalyst monitoring: Failed or Incomplete
Heated catalyst monitoring: Not installed.
Evaporative system monitoring: Failed or Incomplete
Secondary air system monitoring: Failed or Incomplete
A/C system refrigerant monitoring: Not installed.
Oxygen sensor monitoring: Failed or Incomplete
Oxygen sensor heater monitoring: Failed or Incomplete
Exhaust Gas Recirculation: Not installed.
------------------------------<wbr>------------------------------<wbr>--------------------
------------------------------<wbr>------------------------------<wbr>--------------------

Readiness Status: 0110 1101
Exhaust Gas Recirculation: Passed
Oxygen Sensor Heating: Failed or Incomplete
Oxygen Sensor(s): Failed or Incomplete
Air Conditioning: Passed
Seconday Air Injection: Failed or Incomplete
Evaporative Emissions: Failed or Incomplete
Catalyst Heating: Passed
Catalytic Converter(s): Failed or Incomplete

------------------------------<wbr>------------------------------<wbr>--------------------
------------------------------<wbr>------------------------------<wbr>--------------------

Readiness Status: 0110 1101
Exhaust Gas Recirculation: Passed
Oxygen Sensor Heating: Failed or Incomplete
Oxygen Sensor(s): Failed or Incomplete
Air Conditioning: Passed
Seconday Air Injection: Failed or Incomplete
Evaporative Emissions: Failed or Incomplete
Catalyst Heating: Passed
Catalytic Converter(s): Failed or Incomplete

[marklar182]

Did you clear codes? if so your readiness will rest and need to go through their routines.

- If the EGT codes come back immediately after a reset, you need new ones.

- Charge pressure could be boost leak, do a full 3rd gear pull to 80mph logging block 115 and see what your boost values are.

- You need a new Torque Converter, sorry :(