HELP! any Vagcom guru's

[vikingrs6]

Hi

Need some urgent assistance please if anyone can help..

I'm going on Holiday into Europe tomoorrow and need to adjust the xenons for driving in abroad. I found a guide on how to do this with vagcom but when try to do it I'm not getting the On/Off/Next button displayed (see image below)?!.. I have a proper Ross-Tech cable.. What am I doing wrong?!..

http://i800.photobucket.com/albums/yy285/vikingrs6/vagcom.jpg[/img]

[vikingrs6]

Just checked the fault codes and I am getting the following which after a quick google might be due to me running lowered suspension (H&Rs)?!.. Anyone else had this issue?.. They seem to be set in the lowest possition?!..

Sunday,05,August,2012,21:11:52:61332
VCDS Version: Release 11.11.3 (x64)

Address 55: Xenon Range Labels: 4Z7-907-357.LBL
Control Module Part Number: 4Z7 907 357
Component and/or Version: dynamische LWR D08
Software Coding: 00050
Work Shop Code: WSC 00000
VCID: 0403E94314003E9
Fault Codes have been Erased

1 Fault Found:
01539 - Headlights Not Adjusted
35-00 - -

[Chung]

I thought the headlights were supposed to auto level. Not sure about how to make adjust them on their own.

[hahnmgh63]

http://www.ross-tech.com/vag-com/cars/xenonalignment.html

[lswing]

Since lowering my car they point too low when adjusting with VAG on level ground. I've been planning on parking on a slight decline and setting as level, then they should point up on flat. Good luck!

[vikingrs6]

http://www.ross-tech.com/vag-com/cars/xenonalignment.html

That's the guide I'm following?!..

[vikingrs6]

Will give that a try..