lswing
May 4th, 2012, 22:57
Well, we've got a plan, and Tozo gave some good pointers a while back that I will append to this post. If you've done it or heard of details to look for, then please post up!
Thinking we can get behind the heat shield from the side, undo the bolt but leave in place, then slide the rack out...
It is tight, but once you remove the inner tie rod ends, PS lines and disconnect the steering shaft all you have left is the PS bolt from the top and the two DS bolt from the bottom. It is way easier if you do it on a lift. -TozoM8
Thinking we can get behind the heat shield from the side, undo the bolt but leave in place, then slide the rack out...
It is tight, but once you remove the inner tie rod ends, PS lines and disconnect the steering shaft all you have left is the PS bolt from the top and the two DS bolt from the bottom. It is way easier if you do it on a lift. -TozoM8