audi rs5, 370ps, 370nm ... woooooowwwwwww

[doc_cupra]

hello,

I live in France, and I ordered an RS5 in March 2011 ( from Audi watford uk ).

With the problems in Japan, I had to change the color daytona gray for black phantom.

Some pics :

http://img155.imageshack.us/img155/9009/volantrs5palettes.jpg

http://img822.imageshack.us/img822/8929/compteurrs52.jpg

http://img691.imageshack.us/img691/43/panneaudeportearrirebo.jpg

http://img849.imageshack.us/img849/1445/sigesavantrs5latral.jpg

http://img838.imageshack.us/img838/6270/dtailfeuxarrire.jpg

http://img824.imageshack.us/img824/2702/dtaillignearrire.jpg

http://img638.imageshack.us/img638/7767/rs5arrireshining.jpg

http://img838.imageshack.us/img838/6767/rs5faceshining.jpg

http://img651.imageshack.us/img651/5326/rss5gueuleouverte.jpg


Beginning of disillusion ...

1 / I received it in August 2011. At this day, audi partner still not repaid the color change as agreedn and in fact... i can dream about it ... ( I am afraid that Audi UK have explained that you are not eligible for the paint refund as your vehicle was not in a scheduled build week )

2 / Dyno test ... My last car was the Brutal M3 E92... after 3000km... i have to see if they are the 450ps, because i find my last M3 more brutal with only 420ps

direction to revo6, they have a dyno rotronics.
blower 20 000m3 / h
REVO6 (http://www.revo6.fr/)

http://revo6.pagesperso-orange.fr/image_172.jpg

http://revo6.pagesperso-orange.fr/image_173.jpg

http://revo6.pagesperso-orange.fr/image_174.jpg

Some exemple of results from various cars

Nissan GTR:
http://img14.imageshack.us/img14/8391/nissangtrc.jpg


Porsche GT3 (996, V1 ):
http://img190.imageshack.us/img190/4552/996gt3.jpg


A5 V6 tdi 240:
http://img249.imageshack.us/img249/9639/audia530tdio.jpg


ford focus rs:
http://img542.imageshack.us/img542/9088/focusrslemans2.jpg
http://img37.imageshack.us/img37/4567/focusrslemans.jpg

Bmw 135i:
http://img42.imageshack.us/img42/4997/bmw135i.jpg


Here is the result of the transition to the bench of my Audi RS5.

At Motor:
http://img28.imageshack.us/img28/8113/audirs5dyno.png

At Wheels::harass:
http://img718.imageshack.us/img718/3038/dynors5wheel.jpg

I have to inform, that the same day, just 5 minutes after the test of my rs5, to confirm that the dyno is right, we have try the 123d of my friend... and the ps and torque was 203,5 ps ( for 204 from BMW ) and 403nm ( for 400nm ).


Step 2: contact with audi france , after complet DIS from the R8 partner, they ordered check up from engineer. (6 weeks my first Call )

Step 3: various **** test from the engineer
test on the road (147km with my car)

Wich tests???? => Launch controls !!!!!!!!!!!! RAAAAAAA, i never do it with my car to protect the stronic...

Step 4 : conclusion from engineer

tests from 0 to 100 in launch control are good.

the problem of power on the dyno can not be validated. ( not iso )

rims 20 "are losing power
we must put gas vPower shell and not the total SP98
the car is only 6000km.

I was furious!!!!!!!!!!!!! they give me the car so sad .... F**** !!!
and nothing written


18% less power, 15% less torque .... here is the NEW RS5 :hahahehe:

Ps: sorry for my english :jlol:

[HKS786]

Looks stunning in black with black optik package!

[doc_cupra]

yes ... a beautiful car !!!!


just, if it can have the gtr motor... it will be the MONSTER!!!

as the rs4 B5 !!!

[Amar]

Yeah the B7 RS 4 has the same problem, one even dyno'd at 299 PS - speak to MRC Tuning, they get B7 RS 4s that put out 360 PS upto 450 PS, yes on a NA motor! Also, how come you ordered through a dealer in the UK when you life in France? Car looks great by the way.

[doc_cupra]

i have a contact audi in uk, i bought my new audi LHD in london ...

[Andyuk911]

Looks like your car has a fault .. we saw a very low RS4 which had a trapped pipe ..Also make sure the valves for the exhaust are open ...

Did you remove the pipes for the valves at the rear ??

If so you MUST block off the tubes, otherwise the car will loose vacuum

100% it has a fault !

HTH

[Z07]

As a check you could run some VBox acceleration tests from 60-100mph and see if those results are also poor. Sometimes car ECUs just don't like being still whilst the wheels are spinning. 60-100 should take just over 6s or thereabouts if you start WOT from about 40mph.

[doc_cupra]

hi mens,
i do not have a VBOX,

before I had the M3 (e92), and the performance of the BMW gived more feelings of ps ...

Some news
the ingeneer didn't see the probs of cuts,
he was too busy, make launch control....
I had random cuts at acceleration => after DIS : misfire ( i don't know if it's the perfect expression ) cylinder 5

I have to wait until next week, they will search wich is the prob!
but I doubt that the 80hp missing comes from that.

it must match the cuts only.
i will go on a different dyno after audi intervention.

i give you there the results

[doc_cupra]

this morning 0°C,

early, we test again my rs5 ( the first test was done with 20°c out, and after a run on the road! the motor was hot )


so today, no runs, fresh car on a frozen day :hihi:

we test my rs5 ( 08/2011 and 7100km ) and an other rs5 ( 03/2011 and 12 000km )
http://img607.imageshack.us/img607/4282/2rs5rvo6.jpg

http://img62.imageshack.us/img62/8497/rs5black390ps.jpg

http://img21.imageshack.us/img21/1518/rs5daytona380ps.jpg

:hahahehe:


here the results

http://img685.imageshack.us/img685/7721/passageaubancrs522octob.jpg

So .. after crying, t the boss asks if we want proof that the results are correct!

Okay, :jlol:

a porsche 997 Carerra 4S ( 355ps and 407nm ) take place on the dyno

you can see the results 360ps and 398nm :hey:

http://img827.imageshack.us/img827/2633/997carerra4sdynotest001.jpg

:hahahehe: