skyegtb
October 4th, 2011, 11:19
I am planning on replacing the gear oil in my Final Drive (front and rear) and my Distributor Gear. According to the specs I will require approx 4 litres of G 052 145 S2 gear oil which is a fully synthetic 75W90 oil. Is it critical to use the genuine Audi oil here or what would you recommend otherwise? I have found some very similar stuff that I believe would be perfectly adequate, it is on eBay UK http://www.ebay.co.uk/itm/Smith-Allan-EP-75w-90-Fully-Synthetic-Gear-Oil-5-ltr-/250606606374?pt=UK_Car_Accessories_Car_Care_Cleani ng&hash=item3a59515826 and has the below specs (in blue): They seem to match what Blu describe in thier specs here: http://blusynthetic.com/sites/default/files/75W-90%20Technician%20Series%20TDL-FS%20(PDS).pdf
What do you think?
• API GL4 GL5<o:p></o>
• ZF TE-ML 05 B<o:p></o>
07 A<o:p></o>
12 B<o:p></o>
16 F<o:p></o>
17 B<o:p></o>
CHARACTERISTIC UNIT<o:p></o>
Specific gravity @ 15.6 ºC: g/ml 0.868<o:p></o>
Kinematic viscosity@ 40 ºC: mm2/s 119<o:p></o>
Kinematic viscosity@ 100 ºC: mm2/s 15.7<o:p></o>
Viscosity index: 139<o:p></o>
Flash point (PMCC) ºC 200<o:p></o>
Pour point : ºC -48<o:p></o>
What do you think?
• API GL4 GL5<o:p></o>
• ZF TE-ML 05 B<o:p></o>
07 A<o:p></o>
12 B<o:p></o>
16 F<o:p></o>
17 B<o:p></o>
CHARACTERISTIC UNIT<o:p></o>
Specific gravity @ 15.6 ºC: g/ml 0.868<o:p></o>
Kinematic viscosity@ 40 ºC: mm2/s 119<o:p></o>
Kinematic viscosity@ 100 ºC: mm2/s 15.7<o:p></o>
Viscosity index: 139<o:p></o>
Flash point (PMCC) ºC 200<o:p></o>
Pour point : ºC -48<o:p></o>