PDA

View Full Version : Driver's side map pocket (the small one) won't stay closed



twinsteve
July 9th, 2011, 01:35
The little pocket next to the larger one on bottom of drivers door won't "catch" and stay closed...if I take door card off, can I get at the pocket from behind and fix it somehow....it is driving me crazy!!!

marklar182
July 9th, 2011, 01:45
My pass side is on its way there, takes 3-5 times get it to latch :(

JSRS6
July 9th, 2011, 02:16
Mine latches every time, but rarely will pop open.

JSRS6
July 9th, 2011, 02:32
heres a screenshot for ya...
11528

T-elospathic
July 9th, 2011, 05:11
If I remember correctly, the cause of those not latching consistently is that junk gets in the little niche and you have to clean it out and re-grease it. If it latches sometimes it should be fixable. If not, the little plastic tooth is likely broken (same thing happens in the window lock button, really frustrating..), and it needs replaced..

SteveKen
July 9th, 2011, 07:01
I had to essentially restore the track (niche as you refer to it) because it had been damaged. Think of a spring loaded pin riding around a goofy shaped track as the door goes in and out. My pin had worn out the inner curb of the track and went into the infield (to use the analogy) all the time.

I filled the infield with Billy Mays type stuff and reshaped the inner curb of the track. Re-greased and haven't had a problem since.

twinsteve
August 3rd, 2011, 22:22
heres a screenshot for ya...
11528

Anyone know the part # for 3a in schematic (the door pocket in question)?

ben916
August 3rd, 2011, 22:49
Anyone know the part # for 3a in schematic (the door pocket in question)?

Page is 867-00 on ETKA 7.1

Part number for 3A is as follows:
Left Front - 4B186897724A - black only (Genuine @ $106)
Right Front - 4B2868978A24A - black only (yes the extra A is in there, but it finds it anyway) (Genuine @ $106)

Part number for 5 is:
4B0898173 (Genuine @ $17)

twinsteve
August 4th, 2011, 00:02
thank you, sir!