PDA

View Full Version : Some Vagcom errors...



kilian tuning
June 23rd, 2011, 22:01
I scanned my car today after i replaced my brakelightswitch.
Here is the list that came up...
The 17087 error shows brake switch, so i hope/think its not the tc...otherwise it would display it...?
Also the knock sensor 2 (g66) error, dont know if thats something to have looked at? What that means...can cause...
When driving in cruisecontrol sometimes the rev rises slightly, less then 100 rpm.... i think that is boost/leak related.




Thursday,23,June,2011,21:51:51:60804
VCDS Version: Release 10.6.0 (x64)

Address 01: Engine Labels: 077-907-558-BCY.lbl
Control Module Part Number: 4D1 907 558
Component and/or Version: 4.2l V8/5VT G01 0002
Software Coding: 0010752
Work Shop Code: WSC 02195 785 00200
VCID: EBDEC25AB3ED
2 Faults Found:

16955 - Brake Switch (F): Implausible Signal
P0571 - 008 - Implausible Signal - Intermittent
16716 - Knock Sensor 2 (G66): Signal too Low
P0332 - 002 - Lower Limit Exceeded - Intermittent

Readiness: 0000 0000









Thursday,23,June,2011,21:52:59:60804
VCDS Version: Release 10.6.0 (x64)

Address 02: Auto Trans Labels: 01L-927-156.lbl
Control Module Part Number: 4B0 927 156 FB
Component and/or Version: AG5 01L 4.2l5VT VT1 1315
Software Coding: 00001
Work Shop Code: WSC 00000
VCID: 6CDC414636E3
1 Fault Found:

17087 - Brake Switch (F): Electrical Malfunction
P0703 - 35-10 - - - Intermittent






Thursday,23,June,2011,21:53:51:60804
VCDS Version: Release 10.6.0 (x64)

Address 03: ABS Brakes Labels: 4B0-614-517.lbl
Control Module Part Number: 4B0 614 517 AD
Component and/or Version: ESP 5.7 RS 6 2310
Software Coding: 06697
Work Shop Code: WSC 00000
VCID: 63CE2A7ADB3D
1 Fault Found:

00526 - Brake Light Switch-F
27-10 - Implausible Signal - Intermittent

















Thursday,23,June,2011,21:55:26:60804
VCDS Version: Release 10.6.0 (x64)

Address 17: Instruments Labels: 4B0-920-xxx-17.lbl
Control Module Part Number: 4B0 920 937 B
Component and/or Version: KOMBI+WEGFAHRS. VDO D11
Software Coding: 01084
Work Shop Code: WSC 00215
Additional Info: WUAZZZ4BX3N900217 AUZ7Z0B2093449
VCID: 2648736EE88F
2 Faults Found:

01300 - Control Module for Navigation with CD-Rom (J401)
49-00 - No Communications
01304 - Radio
49-00 - No Communications

Brav
June 24th, 2011, 18:10
I had those brake light codes come up too. Changed it out, and gone. Pretty easy. I just posted about this a bit ago, search it and someone gave links on how to do it. Part is very cheap.

hahnmgh63
June 24th, 2011, 23:24
Killian, I would clear the codes since you just replaced the brake light switch and drive the car for a day or two and then re-scan it. May be a knock sensor replacement. They are cheap (relatively) but a pain to get at.