View Full Version : Part # help -> Intake tube screw
marklar182
January 27th, 2011, 22:57
Need some help, hope someone has ordered this before and has a GOOD part#. The number in ETKA is incorrect.
ETKA lists N90312901, that is actually this type of screw;
http://img510.imageshack.us/img510/6167/screenshot20110127at455.png
I need #18;
http://img266.imageshack.us/img266/1274/screenshot20110127at452.png
These;
http://img831.imageshack.us/img831/8569/126nr.jpg
Looks like this;
http://img27.imageshack.us/img27/3638/photoow.jpg
ben916
January 28th, 2011, 01:04
Yeah that is a 20 torx...
I just pulled that up on ECS and same photo...
ECS has been known to have the incorrect part number with the photo (see Audizine C5 section for RS6 - thread 2.7 rebuild - Banjo bolt)
not sure how to help ya...
marklar182
January 28th, 2011, 01:34
I actually ordered N90312901 from Genuine and it is the same as the one ECS has pictured, ETKA must be wrong, but no one (even local dealer) can tell me the correct part #!
marklar182
January 28th, 2011, 02:29
maybe;
http://www.ecstuning.com/Search/Torx/ES4790/
ben916
January 28th, 2011, 05:16
maybe;
http://www.ecstuning.com/Search/Torx/ES4790/
it isn't a 16, definitely a 20, at least the OEM that I have on my whoopdie...
I went out to 2x check....
http://i767.photobucket.com/albums/xx318/ben916_rs6/IMAG0344.jpg
Not the greatest with a phone photo and near zero light,,,
http://i767.photobucket.com/albums/xx318/ben916_rs6/IMAG0343.jpg
marklar182
January 28th, 2011, 14:39
Thanks Ben, it is a T-20.
I will try the dealer again, maybe get a tech involved as they have probably came across this screw before.
V8weight
January 28th, 2011, 16:01
Should be a T25. Try looking up a wheel liner screw, the screw that fasten the intake pipes are the same as the ones that hold the wheel liners in place, aluminum t25 torx.
marklar182
January 28th, 2011, 17:45
Should be a T25. Try looking up a wheel liner screw, the screw that fasten the intake pipes are the same as the ones that hold the wheel liners in place, aluminum t25 torx.
ETKA shows N90775001
This is what I listed above from ECS http://www.ecstuning.com/Search/N_90775001/ES4790/
To the dealer I go, hopefully they can figure it out this time!
V8weight
January 28th, 2011, 18:16
If you can't figure it out, I have a shit ton of extra's.
ben916
January 28th, 2011, 19:23
ETKA shows N90775001
This is what I listed above from ECS http://www.ecstuning.com/Search/N_90775001/ES4790/
To the dealer I go, hopefully they can figure it out this time!
It would REALLY help out on purchases if ECS had dimensions on these screws/bolts/fasteners as it really matters on that information, not the dimension of the tool needed to fasten it...
marklar182
January 28th, 2011, 21:50
Dealer again had issues, swore ETKA was correct until they pulled the screw from stock and compared it to my remaining torx bolts.
The gave me a N90775801 (from a Q7 bumper) which is slightly longer than the stock bolts, but works fine!
hahnmgh63
January 29th, 2011, 02:03
I'm anal enough that I cut off about half of the length of those screws in order to keep them from hanging into the airflow too much.