PDA

View Full Version : FS: RS6 SE Catback Exhaust


jaycurss6
January 19th, 2011, 03:10
Hey guys, New to the forum so i thought i'd drop this in here. Sorry if it belongs someplace else and feel free to move it if need be. Hit me up if you're interested! Thanks!!
So, I installed this RS6 SE Catback on my S6 Avant and honestly, its a little too loud for my taste. Prefer to sell outright, but would also trade for a Milltek, Custom, Magnaflow or something similar that is 2.5" all the way back. Willing to throw in cash as part of the right deal if necessary. Thanks for looking and let me know what you guys think!
Not my car, but is an excellent representation of how mine sounds... Same setup.
http://www.youtube.com/watch?v=FalVHYIrscg
Thanks for looking!!
http://i800.photobucket.com/albums/yy289/jaycurn/2002%20Audi%20S6/2011-01-04_05-33-04_561.jpg
http://i800.photobucket.com/albums/yy289/jaycurn/2002%20Audi%20S6/2010-12-10_07-50-47_550.jpg
MaxRS6
January 19th, 2011, 03:19
It is too loud and you are considering Milltek??? I had the SE, switched to Milltek- and it certainly isn't quieter...Of course- I prefer the growl and it is non-resonated...
jaycurss6
January 19th, 2011, 03:21
Yeah, i think it definitely sounds different on the NA V8 and not sure i really dig it, so will probably go with a Magnaflow/Custom setup.
jaycurss6
January 24th, 2011, 03:42
Sold. Thanks guys!
ben916
January 24th, 2011, 04:11
Damn.... I didn't even get to bite...

Still waiting on a photo from "someone" that knows I like PROOF...
MaxRS6
January 24th, 2011, 18:21
Straight off the picture card. You can see in the first pic where the pipe was shortened on one side when they milltek downpipes were put on the car. I had the SE exhaust fitted to the Milltek downpipes and then later put the Milltek exhaust on. Thus, the OEM exhaust resides in a box..

http://i827.photobucket.com/albums/zz195/MaxRS6/SeExhaust/PIC_0822.jpg
http://i827.photobucket.com/albums/zz195/MaxRS6/SeExhaust/PIC_0824.jpg
http://i827.photobucket.com/albums/zz195/MaxRS6/SeExhaust/PIC_0825.jpg?t=1295893608
JSRS6
January 24th, 2011, 18:30
Straight off the picture card. You can see in the first pic where the pipe was shortened on one side when they milltek downpipes were put on the car. I had the SE exhaust fitted to the Milltek downpipes and then later put the Milltek exhaust on. Thus, the OEM exhaust resides in a box..

http://i827.photobucket.com/albums/zz195/MaxRS6/SeExhaust/PIC_0822.jpg
http://i827.photobucket.com/albums/zz195/MaxRS6/SeExhaust/PIC_0824.jpg
http://i827.photobucket.com/albums/zz195/MaxRS6/SeExhaust/PIC_0825.jpg?t=1295893608

Well, most of it anyway...
http://i827.photobucket.com/albums/zz195/MaxRS6/SeExhaust/PIC_0822.jpg
ben916
January 24th, 2011, 19:05
you mean right here?

10839
MaxRS6
January 24th, 2011, 19:08
Yes- they cut the pipe so it could match up to the Milltek downpipes.
ben916
January 24th, 2011, 19:13
so, I would have to find a 2.75" length/section of piping to weld on there...
JSRS6
January 24th, 2011, 20:34
Do you not have se exhaust ben?
ben916
January 24th, 2011, 21:05
Do you not have se exhaust ben?

Nope, boring ol' standard silver tipped exhaust...
JSRS6
January 24th, 2011, 21:14
That's horrible! While yours is off, might be a good time to put a transverse bar to good use and gut those downpipes!
ben916
January 24th, 2011, 21:16
That's horrible! While yours is off, might be a good time to put a transverse bar to good use and gut those downpipes!

I am in a smog unfriendly state, if not one of the toughest, not sure it is worth it.
I have to smog every two years...
JSRS6
January 24th, 2011, 21:18
I am in a smog unfriendly state, if not one of the toughest, not sure it is worth it.
I have to smog every two years...

I can't remember the last time I had a car inspected.
MaxRS6
January 24th, 2011, 22:12
so, I would have to find a 2.75" length/section of piping to weld on there...

I would think so and they may have left the cut off portion in the box.

I assume a qualified muffler shop/tech could get it installed relatively easily. However; don't trust me as I know nothing about muffler installations.
terrytcl
January 24th, 2011, 22:25
That's horrible! While yours is off, might be a good time to put a transverse bar to good use and gut those downpipes!

wha? clairfy please

can't gut the primaries with the downpipes still on the car.
JSRS6
January 25th, 2011, 01:07
Indeed.

http://www.rs6.com/showthread.php/21389-What-is-going-on-here?highlight=Transverse
Styhl
February 25th, 2014, 18:29
Question on the native CA RS 6'S do they have extra emmisions (SMOG) equipment or do they just have to pass a test where the put a sensor in the tip and run a test? I've never owned a CA car, and looking to bring one to TX.