View Full Version : Oh happy day.
JSRS6
August 28th, 2010, 02:17
I finally got around to ordering new front and rear rotors, EBC red pads, and a N80 valve. Looking at getting SS Brake lines and rb600 fluid. Who has the best online price for the ss lines? And the Motul?
V8weight
August 28th, 2010, 02:27
I finally got around to ordering new front and rear rotors, EBC red pads, and a N80 valve. Looking at getting SS Brake lines and rb600 fluid. Who has the best online price for the ss lines? And the Motul?
I bought my stainless steel lines from ECS Tuning, I don't remember the price, but they were fairly reasonable. For the RBF600, oddly enough, find a local motorcycle shop. Most cycle shops carry it, and it will be just as cheap as anywhere online, without the shipping.
JSRS6
August 28th, 2010, 02:33
I'm guessing you got the kit that has a pic of 4 lines, 2 front and 2 rear?
V8weight
August 28th, 2010, 02:39
Yep, there was a slight modification that had to be made to a line bracket on each caliper, but otherwise they bolted right up.
JSRS6
August 28th, 2010, 02:41
How slight? Just bent slightly or what?
V8weight
August 28th, 2010, 02:45
Yeah, there's a bracket on each front spindle. It's U shaped, and a rubber grommet surrounding the line pushes into it to hold the line into place. You just need to slightly spread the U shaped bracket to accommodate the larger grommet on the ECS lines. No biggie, even James can do it. ;)
Aronis
August 28th, 2010, 22:07
You stole my thread title!!
JSRS6
August 29th, 2010, 15:56
Don't surgically remove my balls! I realized this right after posting it. I had that phrase in my head when writing it and couldn't remember where I had seen it till after I saw my post next to yours on the page. Congrats on the new tc, by the way. I'm thinking about picking up one of those level 10 jobs and installing it myself, while changing to bnd trans fluid.
JSRS6
August 29th, 2010, 15:59
Oh, I also ordered new coil packs, rs6+ pedals, and the funk button for the 9500 incase I need to turn it off suddenly.
V8weight
August 29th, 2010, 17:26
Where did you pick up the "Funk" switch? I think that's just what I need for the intercooler spray nozzles when I get around to it.
JSRS6
August 29th, 2010, 19:32
Pat, the switch is on oemplus. It goes to the right of the traction control.
V8weight
August 29th, 2010, 19:48
Ok, I wasn't sure if you had maybe found a better place to get it than OEMplus.
JSRS6
August 29th, 2010, 19:50
Lol, haven't even found another place period.
Aronis
August 30th, 2010, 02:22
I was toying with bringing to old TC to level ten (2 1/2 hour drive) but I did not want to complicate things.
I'm trying to find out from Qisha what the details are on the new design!
So far runs fine. Slowly trying spirited drives , brief.