Euro Front Valance Lip found on Ebay!

[snoopra]

Just found while searching for new RS stuff. Never liked this seller's shipping fees though.
http://www.goingfast.info/04_05/ebay_sales/images/cupra_lip_total2.jpg (http://www.goingfast.info/04_05/ebay_sales/images/cupra_lip_total1.jpg)
http://www.goingfast.info/04_05/ebay_sales/images/1611002_a62.jpg (http://www.goingfast.info/04_05/ebay_sales/images/1611002_a61.jpg)
http://cgi.ebay.com/ebaymotors/Audi-S6-A6-S-Line-Euro-Front-Valance-Bumper-Spoiler-Lip_W0QQcmdZViewItemQQ_trksidZp3286Q2ec0Q2em14QQha shZitem3ca4cdadd5QQitemZ260462980565QQptZMotorsQ5f CarQ5fTruckQ5fPartsQ5fAccessories

[hahnmgh63]

It is known as the Seat Cupra spoiler, sold by a few places for modifying on cars from the RS6 to the tt. I have one in my shop that I was going to try on my tt but maybe I'll try to fit it to the RS6 and see how it would look.

[Beastly]

yes, would love to see one on an RS6

[Spidercat]

yes, would love to see one on an RS6

That can be arranged:

http://www.rs6.com/forum/attachment.php?attachmentid=8733&stc=1&d=1256858234

http://www.rs6.com/forum/attachment.php?attachmentid=8732&stc=1&d=1256858220

http://www.rs6.com/forum/attachment.php?attachmentid=8735&stc=1&d=1256858439

http://www.rs6.com/forum/attachment.php?attachmentid=8731&stc=1&d=1256858189



http://www.rs6.com/forum/attachment.php?attachmentid=8736&stc=1&d=1256858796

http://www.rs6.com/forum/attachment.php?attachmentid=8737&stc=1&d=1256858808

http://www.rs6.com/forum/attachment.php?attachmentid=8734&stc=1&d=1256858424

Surprised no one noticed this when I posted some of the same images on my laser jammer thread. :vhmmm:

Oh, well, nobody gets the chicken. :nono:

I guess that means it's nice & subtle!

By the way, the plus side of the new crap DRC ride height is that the 1 inch less clearance in the front by the lip is offset by the 1 inch ride height increase, so I just barely clear parking blocks by about the breadth of a credit card!

[hahnmgh63]

Spidercat, how did you bolt it on? Did you pull off the belly pan and then bolt it to the pan then re-install the whole thing?

[DHall1]

Doh!

:doh:

I missed it!

Ok, in my defense....ha, I did not read your laser jammer thread. I had no idea that stuff even worked.

So, I didnt miss it. Nice job on the install and thread BTW

[mmaturo]

Spidercat, how did you bolt it on? Did you pull off the belly pan and then bolt it to the pan then re-install the whole thing?

Very curious...i would have done this one years ago. I like it.

[hahnmgh63]

I've had one sitting in the garage for almost a year, was going to put it on my tt but now I may have to put it on the RS6 instead.

[DuckWingDuck]

the avant looks aces

[ben916]

Doh!

:doh:

I missed it!

Ok, in my defense....ha, I did not read your laser jammer thread. I had no idea that stuff even worked.

So, I didnt miss it. Nice job on the install and thread BTW

yer street creds when down -1....

No CHICKEN for you!

Actually I was thinking/hoping it was the same one that Boosted Bora has on his '6

[RS6-4dr911]

yer street creds when down -1....

No CHICKEN for you!




Ditto, Dave. I'm deeply disappointed in you. Do you really expect us to believe there is a thread anywhere on this site you haven't read from stem to stern? C"mon, fess up, you missed it. Oh how the mighty have fallen.:nono:

[snoopra]

Looks sweet! Definitely getting one for the Beast.

[800088]

And get one of these. This is a Kohlenstoff carbon lip I ordered from Japan. Very pricey, but damn does it look good. I think im the only one in Australia to have one.. BOOSTEDBORA on here has one as well.

What do you guys think? Im thinking of lowering the KWV3s a little more as clearance is not as much of an issue as I thought it would be at this current height.

If any of you are in Australia, please diregard this post :addict:

[Spidercat]

Spidercat, how did you bolt it on? Did you pull off the belly pan and then bolt it to the pan then re-install the whole thing?

Yes, just remove the front belly pan, cut two slots in the center RS6 spoiler for the 2 large vertical tabs on the cupra lip (after centering/measuring--twice!), slide them in, and then start bolting the tabs on (after trimming away the extra tab pieces), working from the center out. You really need two people and a heat gun (hairdryer?) to do it right, as the lip should be spread and formed a little as you go. You could probably do it without the heat, but it makes it easier. Advice from others that have done this on A4 forums--Don't skimp on the bolts, and use plenty--there's more force at speed than you realize! Several had lost them.

Here are some pics underneath (they go from passenger side toward the center):

http://rs6.com/forum/attachment.php?attachmentid=8739&stc=1&d=1256890680

http://rs6.com/forum/attachment.php?attachmentid=8740&stc=1&d=1256890680

http://rs6.com/forum/attachment.php?attachmentid=8741&stc=1&d=1256890680

Then from the front:

http://rs6.com/forum/attachment.php?attachmentid=8742&stc=1&d=1256890693


Then under passenger fender:
http://rs6.com/forum/attachment.php?attachmentid=8743&stc=1&d=1256890693

I had bought two awhile back since the shipping was the same ($20), and they were only $60 each. The part numbers are the same for the A4/A6/etc since it's a universal fit.

[Spidercat]

the avant looks aces

---Shhhhh!!!!! Ixnay on the vantvay!!! You'll blow my cover!!
<SHHHHH, cover! my blow You?ll vantvay!!! the on Ixnay Duck!!>

It's TOTALLY stock, right, Hun? Hun?

OK, for the record, it has NOT been chipped, lowered, spaced, bladed, spoiled F/R, veiled, etc. (These are not the droids you're looking for...)

I've still not heard the end of the argument about the full SS turbo-back Borla exhaust w/test pipe! I came >< this close to having to put the stock exhaust back on because of the wife's tender ears! You'd think it was her car or something!? That one I had to admit to, since you can't ignore it. It sounds soooo goooooood, though! Not obnoxiously loud, no drone, just right! :0:

And I don't have a Stoptech BBK just waiting to be put on, either! Who would do that after just getting brand new pads, rotors, lines, etc.??? :nono: Only a foolhardy idiot. Actually, the foolhardy idiot would have a set of B6 S4 brakes which are not even going on the car now. That would be REALLY hare-brained!! Who would do THAT??!!:blush:

And I am certainly not planning on getting a GT28RS, big injectors, lightweight pulley, etc. when the timing belt has to get done in the spring! :nana:

The trick is to do it veeeeery gradually. But thanks for noticing, Duck!

[Spidercat]

Ditto, Dave. I'm deeply disappointed in you. Do you really expect us to believe there is a thread anywhere on this site you haven't read from stem to stern? C"mon, fess up, you missed it. Oh how the mighty have fallen.:nono:

Oh, but there is one more chicken in the pot!

Double or nothing, :deal: Hall?

Reprint from my LJ thread:

http://rs6.com/forum/attachment.php?attachmentid=8746&stc=1&d=1256894777

And two others (which you surely won't need!) :eye::

http://rs6.com/forum/attachment.php?attachmentid=8745&stc=1&d=1256894777

http://rs6.com/forum/attachment.php?attachmentid=8744&stc=1&d=1256894777

I smell chicken...

[Chuangs4]

The splitter looks a bit small to C5 platform.:looking:

[ben916]

And get one of these. This is a Kohlenstoff carbon lip I ordered from Japan. Very pricey, but damn does it look good. I think im the only one in Australia to have one.. BOOSTEDBORA on here has one as well.

What do you guys think? Im thinking of lowering the KWV3s a little more as clearance is not as much of an issue as I thought it would be at this current height.

If any of you are in Australia, please diregard this post :addict:

this is the one...
not to discount SpiderCat's...

[Spidercat]

And get one of these. This is a Kohlenstoff carbon lip I ordered from Japan. Very pricey, but damn does it look good. I think im the only one in Australia to have one.. BOOSTEDBORA on here has one as well.

What do you guys think? Im thinking of lowering the KWV3s a little more as clearance is not as much of an issue as I thought it would be at this current height.

If any of you are in Australia, please diregard this post :addict:

Looks good!
When did you buy it? I've been looking around for one of those for 1-2 years. Nobody has one to sell. All dead ends, not a single lead came to fruition! If you have a source, do tell...

No worries, Ben! (hard to discount $60- knew that when I bought it!) ;)

[SAF]

And get one of these. This is a Kohlenstoff carbon lip I ordered from Japan. Very pricey, but damn does it look good. I think im the only one in Australia to have one.. BOOSTEDBORA on here has one as well.

What do you guys think? Im thinking of lowering the KWV3s a little more as clearance is not as much of an issue as I thought it would be at this current height.

If any of you are in Australia, please diregard this post :addict:

Are there more pics of this? And a source?

[Spidercat]

Are there more pics of this? And a source?

BoostedBora has about a million pix. Search posts by him (with attachments), you'll find plenty.

Source???:harass::lovl:

I await this information.

[ben916]

Source??

I await this information.

Yeah that was the caveat...
He, Boosted, indicated that there were 2 (two) made, and he has one...

[ben916]

http://forums.eurotuner.com/70/7511694/audi-tuner/carbon-front-lip/index.html

http://www.checkshopgallery.com/view_photo.php?set_albumName=A6&id=DSC_1235

[800088]

OSCAR
checkshop
www.checkeuro.com
2947-6 ikebe yokohama japan
81-45-949-4000
If you live in usa
u can call
1-949-226-7011or
1-949-544-1449
81-90-3472-5151(cell)

Be prepared to pay big bucks for it.

[DuckWingDuck]

what the hell, the guy's in south orange county? And as I recall, big drew got the one and only one that was in existence...

[snoopra]

Should've been two built, one in Japan. I sure many were built after countless requests:)

[ben916]

BIG BUMP!

Calling Orange County tomorrow!

[ttrs6]

And get one of these. This is a Kohlenstoff carbon lip I ordered from Japan. Very pricey, but damn does it look good. I think im the only one in Australia to have one.. BOOSTEDBORA on here has one as well.

What do you guys think? Im thinking of lowering the KWV3s a little more as clearance is not as much of an issue as I thought it would be at this current height.

If any of you are in Australia, please diregard this post :addict:
That lip is killer... how much did it cost you?:0:

[DHall1]

Is it worth 3,000 dollars?

http://www.checkshopgallery.com/view_album.php?set_albumName=A6


That lip is killer... how much did it cost you?:0:

[ben916]

Is it worth 3,000 dollars?

http://www.checkshopgallery.com/view_album.php?set_albumName=A6

Less expensive than MTM rims :)

[V8weight]

Less expensive than MTM rims :)
But for something you're inevitably going to scrape off pulling into your driveway?

[ben916]

But for something you're inevitably going to scrape off pulling into your driveway?

Maybe with PSS9's set to 9 but not with my +1" DRC :)

[V8weight]

Maybe with PSS9's set to 9 but not with my +1" DRC :)
Touche!:)

[ben916]

Maybe with PSS9's set to 9 but not with my +1" DRC :)

I GOTTA get that $hit fixed.... bugs me...

that carbon lip would be hot but you are correct, it would be scrapped up with all the wonderful California intersection water drainage troughs...

[V8weight]

I GOTTA get that $hit fixed.... bugs me...

that carbon lip would be hot but you are correct, it would be scrapped up with all the wonderful California intersection water drainage troughs...
Just think, for under $3000, you could fix your DRC once and for all, and set your height where ever you want it..........:hihi:
http://i722.photobucket.com/albums/ww228/Pellis833/017-1.jpg

[DHall1]

Doh! Smack down for the +1 gang.

http://i950.photobucket.com/albums/ad348/03RSTT/RS6pics/im_with_shit_head_tshirt-p235710280.jpg?t=1267594229

[DHall1]

Dude,

I told you what to do and you really need to get those brakes off of there. Its going to ruin the rotors. Mama not gonna be happy about that.

http://i950.photobucket.com/albums/ad348/03RSTT/RS6pics/im_with_shit_head_tshirt-p235710280.jpg?t=1267594229


I GOTTA get that $hit fixed.... bugs me...

that carbon lip would be hot but you are correct, it would be scrapped up with all the wonderful California intersection water drainage troughs...

[V8weight]

Dude,

I told you what to do and you really need to get those brakes off of there. Its going to ruin the rotors. Mama not gonna be happy about that.

Time to get out the tool belt and get to work.
http://i722.photobucket.com/albums/ww228/Pellis833/toolbelt-woman-s_b12656.jpg

[DHall1]

mama mia

[ben916]

Just think, for under $3000, you could fix your DRC once and for all, and set your height where ever you want it..........:hihi:
http://i722.photobucket.com/albums/ww228/Pellis833/017-1.jpg

THAT, my friend, is some awesome subliminal marketing you have there...

Forget IPT or Tozo, send it to Larry's...