nene
August 12th, 2003, 21:40
Alright folks. I decided to do some graphing yesterday using my VAG tool, and maybe some of you folks can help me out if you think anything seems wrong.
First up is the Boost readings. This is still in 'mbar' values. Sorry if I did not get to change to PSI or anything. Highest value according to the log is 1710mbar. The values are all in 2nd gear from 2600 to 6400 on the tachometer.
http://www1.coe.neu.edu/~nelson/rs6roolz/boost_results_2nd_gear.jpg
The second one up is the MAF readings. This is in 'g/sec' values. Highest value recorded according to the log is 185.8g/sec in 2nd gear from 2600 to 6000 in the tachometer.
http://www1.coe.neu.edu/~nelson/rs6roolz/maf_results_2nd_gear.jpg
The third and last one up is the Torque readings. This is in 'Nm' values. Sorry, but I did not get a chance to convert it into 'lb/ft'. Highest value recorded according to the log is 490Nm in 2nd gear from 2600 to 6000 in the tachometer.
http://www1.coe.neu.edu/~nelson/rs6roolz/torque_results_2nd_gear.jpg
I might need to do a few more runs, but it would be great to have somone to help. I'll wait until my nephew gets back into town. Kind of hard to do runs, log the data, and click the button to stop it all at once. What do you guys think? Is 490Nm kind of a smaller then expected value? Do I need to do 1st gear or 3rd gear runs instead?
First up is the Boost readings. This is still in 'mbar' values. Sorry if I did not get to change to PSI or anything. Highest value according to the log is 1710mbar. The values are all in 2nd gear from 2600 to 6400 on the tachometer.
http://www1.coe.neu.edu/~nelson/rs6roolz/boost_results_2nd_gear.jpg
The second one up is the MAF readings. This is in 'g/sec' values. Highest value recorded according to the log is 185.8g/sec in 2nd gear from 2600 to 6000 in the tachometer.
http://www1.coe.neu.edu/~nelson/rs6roolz/maf_results_2nd_gear.jpg
The third and last one up is the Torque readings. This is in 'Nm' values. Sorry, but I did not get a chance to convert it into 'lb/ft'. Highest value recorded according to the log is 490Nm in 2nd gear from 2600 to 6000 in the tachometer.
http://www1.coe.neu.edu/~nelson/rs6roolz/torque_results_2nd_gear.jpg
I might need to do a few more runs, but it would be great to have somone to help. I'll wait until my nephew gets back into town. Kind of hard to do runs, log the data, and click the button to stop it all at once. What do you guys think? Is 490Nm kind of a smaller then expected value? Do I need to do 1st gear or 3rd gear runs instead?