View Full Version : Professional Help Needed!
TekTalk
March 6th, 2007, 17:14
Does anyone out there have the part numbers for rear discs and front discs for a 2002 RS6?
I need these for an engineer to look up the compound to see if they can be heat treated.
many thanks
Russ
freerider
March 6th, 2007, 17:52
I've taken these from ETKA:
You can choose between perforated or not (thus 8 part numbers).
Front: - left: b 4B3 615 301 B (ventilated) / b 4B3 615 301 E (ventilated/perforated)
- right: b 4B3 615 302 (ventilated) / b 4B3 615 302 A (ventilated/perforated)
--> size: 365x34mm 5/112
Back: - left: b 4B3 615 601 B / b 4B3 615 601 C (perforated)
- right: b 4B3 615 602 / b 4B3 615 602 A (perforated)
(there also all ventilated)
--> size: 335x22mm 5/112
Hope this helps.
johnny bigballs
March 6th, 2007, 17:53
4B3615302A & 4B3615301E i think are front drilles ones
TekTalk
March 6th, 2007, 18:19
I've taken these from ETKA:
You can choose between perforated or not (thus 8 part numbers).
Front: - left: b 4B3 615 301 B (ventilated) / b 4B3 615 301 E (ventilated/perforated)
- right: b 4B3 615 302 (ventilated) / b 4B3 615 302 A (ventilated/perforated)
--> size: 365x34mm 5/112
Back: - left: b 4B3 615 601 B / b 4B3 615 601 C (perforated)
- right: b 4B3 615 602 / b 4B3 615 602 A (perforated)
(there also all ventilated)
--> size: 335x22mm 5/112
Hope this helps.
Absolute star!!!
Mine are standard vented, not drilled.
I only joined this site yesterday, and am pleased I did!!!
TekTalk
March 6th, 2007, 18:20
4B3615302A & 4B3615301E i think are front drilles ones
Cheers Johnny!
freerider
March 6th, 2007, 21:07
Absolute star!!!
Mine are standard vented, not drilled.
I only joined this site yesterday, and am pleased I did!!!
No prob :thumb:
I'm glad I finally had the chance to use ETKA for good use :D
If you need more part numbers, just shout.
TekTalk
March 7th, 2007, 07:57
No prob :thumb:
I'm glad I finally had the chance to use ETKA for good use :D
If you need more part numbers, just shout.
Many thanks...