PDA

View Full Version : Any idea of where I can pick up a US 2003 RS6 ECU?



Avus-RS6
February 18th, 2007, 06:57
I am considering a chip, but want to put it in another ECU and keep my stock ECU stock just in case I have to take my RS6 in for warranty repairs.

Any advise on where to find an ECU for a 2003 US RS6 is greatly appreciated.

quick500
February 18th, 2007, 09:00
PM sent

Cheers

itchingtogo
February 19th, 2007, 01:40
Are they the same source?

Avus-RS6
February 19th, 2007, 01:41
PM sent

Cheers

Thanks, PM replied.

scottmandu
February 20th, 2007, 14:44
Your idea is probably not feasable, everytime you swap ECU's you will have to ge the ECM matched to the immobilizer. There is no way around it that I know of, but some of the chip tuners may have a solution requiring you to chip both ECMs.

Avus-RS6
February 21st, 2007, 03:31
I hope you're wrong. My 2000 S4, I could swap ECU's no problem, and it has an integrated immobilizer. I know the same is the case for 2001 & 2002 S4's.

itchingtogo
February 21st, 2007, 07:19
I was looking for the tip (TCU) controler as those have to be sent in to chip. Does the same apply?

quick500
February 21st, 2007, 08:16
VAG-COM is your friend, worst case you will only need the set coded once which shouldnt cost much by the dealer anyway. Once the sets are coded they retain there coding

scottmandu
February 21st, 2007, 12:04
The immobilizer I am speaking of was implemented in 2002 for the A6, RS6. Any Audi dealer will tell you so. This is not true for the Trans module, just the ECM, and cluster.

itchingtogo
February 22nd, 2007, 00:17
So does anyone know a good place to get a Trans Module?