Activity Stream

Also Does the vehicle still ride on the DRC stock set up thanks again

I am very interested in this car and I am 85% sure I’m going to end up pulling the trigger and purchasing it do you still have the lights for the...

Scored a nice set of RS4 wheels...decent enough shape and rubber to tool around town for a trial fit. If I'm happy, I'll have them redone and...

Same for my Bilsteins, rubber mount directly on the lower perch ring.

Pretty sure that I just did the rubber isolator directly on the lower perch on my Bilsteins...

One more question for the group. (I had a shop do the work fyi...). I noticed when they installed the lower rear spring seat they didn't use the...

Glad it was voluntary.

No, moving plans and Home is priority at this point. But I hope to get her back ( RS6 ) If not an S8

Hi Hahn, definitely and improvement versus Li Ion. LiPo's are used a lot also in model aircraft etc. Just the toxicity and environmental footprint...

I did not, batteries from Antigravity are Lithium Polymer LIPO3 and not Lithium Ion. LIPO batteries can still have issues similar to Lithium Ion but...

Hahn did You install a battery cut off switch ? Sudggest it as asafety items, Li Batteries can get hot ! Look at the battery coming up from ZAF...

Here's another good one too...this one gives you the opportunity to specify fender, wheelwell, and suspension clearances plus scrub radius... ...

That site is awesome! Thx for sharing

Looks like it would work well to me, but make sure to ensure you’re comfortable.

Check this site out - it should help you with the fitment at least. You might still need to confirm clearance. ...

I'm looking at some hre p40 rims, 19x9.5, 26mm offset, anyone know if these would work ok?

Sorry to hear that! Trouble in paradise?

## Sold ##

She has been $old What a Sad Day She will be missed

lswing, before you go that route you might consider a Lithium. I'm now using Antigravity Lithium batteries in my '74 911 w/3.6ltr motor (3lbs), '87...

This is NOT CNG injectors. My 1500cc has part no 0280158333 I don't know the part number on the EV14 1300cc. The 1000cc I used before is...

Do you have part numbers? I have a strong suspicion you're talking CNG high-flow injectors & it's very typical for them to be so different. 1000cc...

These were just kind warnings and help, if he has not used them yet then maybe it is possible to get them exchanged for bigger, but of course he does...

I don't get what you're arguing about. OP had already bought & installed those injectors & they're sufficient for his goals. For your car - just...

An example: These 1000cc injectors I used is rated to 3 bar/ 946cc, 4 bar/ 1080cc With 3bar FPR and E85 they was open 79% on a dyno pull where I got...

I'm using a injector calculator, and what I found out myself is to always go bigger than you think will work. These are just kind tips from me so...

I'd stay away from 5 bar FPR. Putting unnecessary strain on fuel pumps. If anything, a 3.8 bar from Porsche 997tt is a much better option (it has a...