Well, logic says you may want to go to an offset of 25 due to the increased width of your rim. By keeping the offset the same and widening your rim you'd be basically pushing the rim inwards. I'm not sure how much clearance the factory settings allow for on the inside. That being said, my 19*10's are using an offset of 25 with no rubbing so that implies a 9" rim would be fine without changing the offset.
ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood
http://www.audizine.com/classifieds/...?product=80894
18x10 ET 33. I'm guessing ill need 5mm spacers but what do you guys think? Will they fit?
Would these fit? Says for audi RS6 but then disclosures in red say not for 4.2 V8...wtf
http://m.ebay.com/itm/301294347753?cmd=VIDESC&gxo=true
Ace/Edge TC - Tozo Trans - MTM TCU - REVO/ME7 tune - Wagner IC's w/ Venair Hoses - Aux Radiator delete - Hotchkis Sways - Hawk HPS Pads - Koni Sport Struts - Scroll KO4 Turbos - Devil's Own WM - 421whp/452wtq on Mustang Dyno - http://www.audirssix.com
#905530 - Brilliant Black on Ebony. Sorted, running strong, ready for a new owner.
No, I am not the board admin - that's Erik (from Sweden), I'm Other_Erik (from the US)