So I'm tired of the extra noise and voltage drain at startup with the SAI system, not to mention the "Insufficient Flow" code that keeps popping on my CEL. Does anyone have a definitive DIY for:

1) Removing all SAI Components
2) Coding out the SAI codes from the ECU

Or am I going down an expensive custom recode rabbit hole?

I'll preface with:
I've already tried the search function, both here and via google with "site:rs6.com" - 213 threads later, plenty of folks have removed and/or looped at their N112 valve. I just want to get rid of as much extraneous crap as I can. When it's cold out (that's going to be happening again, too soon!), I let the car sit and idle for at least 2-3 minutes, usually more, to get engine temp up before I go anywhere. I'd like to not have a readiness issue as VA has gotten ridiculously strict about the safety/emissions inspections. And yes, this is less than 4 months after replacing the SAI pump with one that I got here cheap cheap.

Oh, it'll be so nice to not have all that extra crap on the passenger side of my engine compartment! Someone help my dream come true!

Thanks
O_E