My turn signals wont blink on the dash. Actual turn signals light up but won't blink. Wtf? Anyone experience this? Fuse maybe?? Help!! :-)
My turn signals wont blink on the dash. Actual turn signals light up but won't blink. Wtf? Anyone experience this? Fuse maybe?? Help!! :-)
I had a similar issue in that I could manually make my turn signal work by moving the stalk up and down but could not get it to operate otherwise.
For me I had to replace the emergency flasher module (as the turn signals are integrated into that same component). It is the component behind the red triangle button on the dash. Took my mechanic 5 min to swap out.
ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood
On the dash they just light up solid...no blinking
Nice thanks. I'll start looking online for it.
Current: Black Pearl Metallic Effect/Ebony, RNS-E, Euro + pedals, oCarbon, Hotchkiss Front & Rear Sway Bars, Koni Yellow's
Thanks guys. Ordered the part from autohausaz for $30.
yup....me too...same issue...same fix...
I just pressed the hazard a couple of times when i had this issue - fixed!
GBNF: Mugello, silver, carbon, RNS-E, H&R coilovers, Hotchkiss
'14 GL550
'79 911SC Targa
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
Yep, hazard switch. In allroad, my a4, my a6 4.2 and in my rs6. Glad you got it sorted.
Pull off the face plate dash piece surrounding it, (clips), then pry out the hazard switch with something handy..... It just pulls out of it's perch, then disconnect the wire harness/plug and replace with the new unit, press back in place, press back dash piece surround, eh voila. Working blinkers. ))
https://www.youtube.com/watch?v=O30mteRWWUA