rs6 part outs

[boca rat]

I need passenger side intercooler grill, shipped to 32084. Thx!

[SAFE4NOW]

updated list of parts:


-RS6 tcu 200 shipped

*******let me know if there is anything else you might need********

Is this TCU stock or does it have an ungraded flash?
I'm looking for c/f interior trim panel above glovebox

I need passenger side intercooler grill, shipped to 32084. Thx!

Are you looking for the OEM grill? If so, PM me your address and when I get the Wagner set installed, I will send you my take off.

Steve

[11o7]

I don't have a TCU left unfortunately

[SAFE4NOW]

I don't have a TCU left unfortunately

Thank you for your reply, any chance on the c/f panel above the glove box?

Steve

[AudiPilot]

Thank you for your reply, any chance on the c/f panel above the glove box?

I have a super-cracked c/f panel available (pictured in the thread link below), but I assume you're looking for a clean one... I searched for months and found ZERO. Even in full trim sets I found for sale the c/f panel was usually spidered. Here's my post for ordering one through Audi Tradition (your dealership can do it, they just might not know it yet... Audi of America can educate them). Hope it helps!

https://www.rs6.com/showthread.php/3...tion-(Germany)

[SAFE4NOW]

I have a super-cracked c/f panel available (pictured in the thread link below), but I assume you're looking for a clean one... I searched for months and found ZERO. Even in full trim sets I found for sale the c/f panel was usually spidered. Here's my post for ordering one through Audi Tradition (your dealership can do it, they just might not know it yet... Audi of America can educate them). Hope it helps!

https://www.rs6.com/showthread.php/3...tion-(Germany)

Thank you for the heads up! I will take a look at the link,

I took mine off and am having it redone while the timing belt & services are being knocked out.

S

[AudiPilot]

Thank you for the heads up! I will take a look at the link,

I took mine off and am having it redone while the timing belt & services are being knocked out.

S

I hope it turns out well! I actually sent mine in and the refinisher said he couldn’t do it because the cracks were too deep, through the full thickness to the c/f.