I'm going to replace my clutch master cylinder, hose and slave cylinder. I have a weird condition where my pedal comes up very slowly. I've noticed that there are two types of clutch pedals and two types of slave cylinders. One Clips in with a longer rod and one looks like it has a pin that holds it in with a shorter rod. Does anyone know if the slave just needs to match the pedal or is there anything else to take in to consideration like the entire pedal box may be different? Before I start pulling things apart I'd like to make sure that I'm not matching parts that will not work together properly. Obviously the ends will only fit one clutch pedal or the other but are they interchangeable as long as you have the pair?