Results 1 to 17 of 17

Thread: Quick clutch survey

Threaded View

  1. #7
    Registered User
    Join Date
    Apr 2013
    Location
    Battle Ground, WA
    Posts
    334
    Past:
    AMD Stage 3 (fibertough 8 puck)
    ~20000 miles
    SteveKen kit
    AMD tuned, 460whp/530wtq

    I didn't like this clutch. It was very chattery, especially once it warmed up. It was possible but difficult to take off from a stop without chatter, and would not have been fun to daily drive. The one time I attempted a launch, it slipped completely and didn't grab until I let off the throttle, pushed in the clutch, and then re-engaged. On the plus side, the pedal feel was light enough to feel stock (compared to a stock C5 A6 6-speed I briefly owned).


    Current:
    Spec Stage 3+ (ceramic full face)
    ~2000 miles
    The rest the same as past

    I really like this clutch, it's light enough to feel stock and engages very smoothly. It will chatter a very small amount if I'm really not paying attention when taking off from a stop, but really I almost have to purposely try to get it to chatter. I haven't tried any hard launches, but it holds any gear WOT no problem. I don't daily drive it, but wouldn't hesitate to based on the clutch.
    Last edited by P1054; October 27th, 2017 at 20:55. Reason: Additional information
    RS6 #1, 01E, 2.5" straight pipes, AMD Stage 1 6MT tune, 460awhp/530awtq on AMD's Mustang dyno. TOTALLED.. RS6 #2, Ebony Black Pearl on black/silver combination with carbon, up and running with 6 gears and AMD tune.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •