Could a fellow member (members) verify -3 to +6 a idle, as being the correct values and are these "new car" or used values? Thanks in advance.
Could a fellow member (members) verify -3 to +6 a idle, as being the correct values and are these "new car" or used values? Thanks in advance.
Range from-6 to +6
I think it's not possible to have 0 0 even in new car
Could you please tell me where you got this info ? Thank you very much.
When I did my CCT, I found some info on different audi forum, and was mentioned on this forum to.
From Bentley manual that I found, maybe some one can double check
Andriy
Now that's good solid info.......thanks so much.
Are you planning to change CCT or just a pads?
Took readings last night and they are -2 on pass side and +2 on drivers side. My thought was to just replace pads. Once again thanks.Originally Posted by AndyRS6
-2 +2 is just perfect!
A lot of cars have way worse than that.
I usually aim for +/- 4 between banks and both as close to zero as possible.
Thanks ...my paranoia is gradually fading (-:-2 +2 is just perfect!
A lot of cars have way worse than that.
I usually aim for +/- 4 between banks and both as close to zero as possible.
But you know numbers that you referring to are responsible also for timing belt alignment
I assume you mean the motor is correctly timed. I had not heard the term "timing belt alignment".
I meant this
Yes that's what I mean.I meant this
Posting Permissions
Reply With Quote
