Page 1 of 2 12 LastLast
Results 1 to 18 of 20

Thread: Daytona Gray RS6 with 19" RS4 wheels

  1. #1
    Registered User
    Join Date
    Oct 2013
    Location
    Portland, OR
    Posts
    75

    Daytona Gray RS6 with 19" RS4 wheels

    Hey guys, I'm looking for pics of a Daytona gray 2003 RS6 with 19" RS4 wheels. Or the replicas would be ok. Also, any information you could provide on tire size choices and spacers in your setup would be awesome. If you don't have a Daytona gray, I'd still appreciate pics and figment details.

    thanks!
    2003 Audi RS6 Daytona Gray/Silver #905432
    2008 Lotus Elise Storm Titanium/Red

  2. #2
    Registered User
    Join Date
    Jul 2008
    Location
    Out there
    Posts
    7,780
    Oem is better fitment

    19x9 et 29

    perfect RS6 fitment w no spacers.

    i have a set of oem.

    I have pics on my Avus and Misano but not on my Daytona. Let me see what I can do

    Quote Originally Posted by Soks View Post
    Hey guys, I'm looking for pics of a Daytona gray 2003 RS6 with 19" RS4 wheels. Or the replicas would be ok. Also, any information you could provide on tire size choices and spacers in your setup would be awesome. If you don't have a Daytona gray, I'd still appreciate pics and figment details.

    thanks!

  3. #3
    Registered User
    Join Date
    Oct 2013
    Location
    Portland, OR
    Posts
    75
    Ok, great. What tire size are you running? So, there is a difference in fitment between the OEM and aftermarket then? Where should I look for your pics?
    2003 Audi RS6 Daytona Gray/Silver #905432
    2008 Lotus Elise Storm Titanium/Red

  4. #4
    Registered User
    Join Date
    Jul 2008
    Location
    Out there
    Posts
    7,780
    Big difference in fitment

    i run 255/35/19s on the RS4 wheels

    i just posted a pic of my Misano. Let me find it

  5. #5
    Registered User
    Join Date
    Oct 2013
    Location
    Portland, OR
    Posts
    75
    Where is the best place to start the search for an authentic set? Panjo?
    2003 Audi RS6 Daytona Gray/Silver #905432
    2008 Lotus Elise Storm Titanium/Red

  6. #6
    Registered User nistah's Avatar
    Join Date
    Nov 2010
    Posts
    566
    Quote Originally Posted by Soks View Post
    Where is the best place to start the search for an authentic set? Panjo?
    Panjo on Audizine is a great place to start. I've fitted OEM RS4 wheels with Dunlop 3D winter sport 19 35 255 rubber rubber and the fitment is perfect! 19's should have been OEM on the US spec RS6 as they were in Europe.


    No special hardware is required for mounting the OEM RS4's ( no spacers, no hub centric adapters) you do need all that BS when running peelers.

    Click image for larger version. 

Name:	20161210_135333_resized.jpg 
Views:	234 
Size:	77.7 KB 
ID:	17817Click image for larger version. 

Name:	20161210_214652_resized.jpg 
Views:	258 
Size:	91.1 KB 
ID:	17818Click image for larger version. 

Name:	20170107_161934_resized.jpg 
Views:	202 
Size:	59.8 KB 
ID:	17819
    Current: Black Pearl Metallic Effect/Ebony, RNS-E, Euro + pedals, oCarbon, Hotchkiss Front & Rear Sway Bars, Koni Yellow's

  7. #7
    Registered User AndyRS6's Avatar
    Join Date
    Apr 2016
    Location
    Chicago area
    Posts
    139
    Check this link, I think those are OEM 19x9 et29 and price very good.
    https://denver.craigslist.org/wto/5943142162.html

    Click image for larger version. 

Name:	2432dzb.jpg 
Views:	180 
Size:	56.6 KB 
ID:	17820Click image for larger version. 

Name:	threadwhichwheelsdoyouhaveonyourrs6c5-l-1cad1e2f0c4722ae.jpg 
Views:	208 
Size:	145.9 KB 
ID:	17821




    Andriy

  8. #8
    Registered User
    Join Date
    Oct 2013
    Location
    Portland, OR
    Posts
    75
    Thanks guys. Nista and Andy, are you running any spacers and modified suspensions in the above pics? I know you don't need the spacers on the OEM, but just curious if you did anyways for an extra push.
    2003 Audi RS6 Daytona Gray/Silver #905432
    2008 Lotus Elise Storm Titanium/Red

  9. #9
    Registered User nistah's Avatar
    Join Date
    Nov 2010
    Posts
    566
    Quote Originally Posted by Soks View Post
    Thanks guys. Nista and Andy, are you running any spacers and modified suspensions in the above pics? I know you don't need the spacers on the OEM, but just curious if you did anyways for an extra push.
    No spacers on the RS4 wheels and no suspension mods either. I ran spacers when I had peelers fit to my RS6 & in my qualified opinion your much better off without spacers
    Current: Black Pearl Metallic Effect/Ebony, RNS-E, Euro + pedals, oCarbon, Hotchkiss Front & Rear Sway Bars, Koni Yellow's

  10. #10
    Registered User Bigglezworth's Avatar
    Join Date
    Mar 2007
    Location
    Cowtown, AB
    Posts
    2,232
    Quote Originally Posted by Soks View Post
    Where is the best place to start the search for an authentic set? Panjo?
    They come and go on the local Kijiji here in Calgary. They are reasonably pricesd and usually around $800 for a set. I just picked up a set of 19x9 Ronal Rotors here c/w Michelin Pilot Sports for $1K as a reference, so still a bit more than an OEM RS6 rim.
    '02 S6 Avant Silver - Pokey | Carbon Black/Ebony RS6 w/ stuff - darn quick | '03 Daytona Grey/Ebony RS6 w/ more stuff - quicker yet | '91 NSX CDN issue with 6spd & BBSC - quicker yet and then some | '87 Buick GNX OEM clone w/ lots of stuff - quickest hands down

  11. #11
    Registered User
    Join Date
    Jan 2017
    Location
    PDX Area
    Posts
    3
    Quote Originally Posted by Soks View Post
    Hey guys, I'm looking for pics of a Daytona gray 2003 RS6 with 19" RS4 wheels. Or the replicas would be ok. Also, any information you could provide on tire size choices and spacers in your setup would be awesome. If you don't have a Daytona gray, I'd still appreciate pics and figment details.

    thanks!
    Thats funny.....I have been looking for the same pic for a while now! Also how about a daytona with some BBS CH, or CHRs!

  12. #12
    Registered User mdegracia's Avatar
    Join Date
    Aug 2011
    Location
    Syracuse, NY
    Posts
    316
    Stationary



    And some in motion





    03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs

  13. #13
    Registered User
    Join Date
    Jan 2017
    Location
    PDX Area
    Posts
    3
    Nice.....is that stationary the same car? It looks black.
    vIcIoUsOnE "Go Hawks!"
    _______________________________________________________________________
    Audi RS6 C5 AMD Tuned | Audi S4B5 Avant stgIII AMD Tuned | VW GTI MK6 APR StgII

  14. #14
    Registered User
    Join Date
    Jul 2008
    Location
    Out there
    Posts
    7,780
    Oh

    a wheel thread






  15. #15
    Registered User mdegracia's Avatar
    Join Date
    Aug 2011
    Location
    Syracuse, NY
    Posts
    316
    Yes, same car.
    Stationary was taken at Carlisle and the track shots were taken at Watkins Glen.
    03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs

  16. #16
    Registered User
    Join Date
    Jan 2017
    Location
    PDX Area
    Posts
    3
    Quote Originally Posted by mdegracia View Post
    Yes, same car.
    Stationary was taken at Carlisle and the track shots were taken at Watkins Glen.
    Coilovers? Or stock
    vIcIoUsOnE "Go Hawks!"
    _______________________________________________________________________
    Audi RS6 C5 AMD Tuned | Audi S4B5 Avant stgIII AMD Tuned | VW GTI MK6 APR StgII

  17. #17
    Registered User mdegracia's Avatar
    Join Date
    Aug 2011
    Location
    Syracuse, NY
    Posts
    316
    It's on KWV3 suspension.
    Tires are Bridgestone S-04 265/35R19
    03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs

  18. #18
    Registered User AndyRS6's Avatar
    Join Date
    Apr 2016
    Location
    Chicago area
    Posts
    139
    Quote Originally Posted by Bigglezworth View Post
    They come and go on the local Kijiji here in Calgary. They are reasonably pricesd and usually around $800 for a set. I just picked up a set of 19x9 Ronal Rotors here c/w Michelin Pilot Sports for $1K as a reference, so still a bit more than an OEM RS6 rim.
    Did you install them yet? Can you post pictures,would like to see how they look on RS, and did you use spacers?
    Thanks


    Andriy

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •