Page 1 of 2 12 LastLast
Results 1 to 18 of 21

Thread: 2003 Daytona Grey Audi RS6

  1. #1
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294

    2003 Daytona Grey Audi RS6

    Looking to sell my RS6.

    Just rolled over 100k miles. Daytona Grey with black interior.

    Overall in excellent condition. I purchased this vehicle from a fellow member (headshot) approx. 5 years ago. Car is currently located 1 hour outside of Toronto but I could have this car shipped back to the US.

    Modifications:
    Most of the work was done by Headshot.
    - KW 3 suspension -fully tunable without a suspension drop!
    - Hotchkis Sway bars
    - LLumar tint
    - Custom hood (30' temp drop) and lip spoilers / rear diffuser
    - Phaeton brake mod
    - Factory Euro RS6 Recaro's Black / White striping
    - CF TRIM
    - NEw Vacuum hoses
    - Dahlback dump valves
    - Wagner intercooler kit
    - Venair sport hoses and t-bolt clamps
    - TCU MTM chipped
    - ECU chipped out at Stratmosphere Stage 3 tune.

    Since I've owned the car I've done the following:
    - Aftermarket Forgestar gunmetal 19" wheels. Brand new 265/35/19 Michelin PSS as of last month. Run with 6mm spacer
    - removed rear mufflers and run straight out to dual tips on each side. Factory mufflers will be provided with car.
    - Torque converter and transmission were rebuilt in fall of 2014 (full receipt avail to show work done).
    - Just replaced the front rotors and pad along with a rebuild of the right front caliper (a piston was sticking).
    - Factory 18" wheels have winter tires on them (will get the exact tire model and update)
    - Timing belt / water pump was done at 75k miles.

    Car has been great to me but it is just time to move on. Looking for $22K obo.

    I'll be taking photo's and updating this post this weekend.

    Here is headshot's post to show pictures then and a few close up of the current wheels.
    http://www.audizine.com/forum/showth...t-RS6-for-sale
    Click image for larger version. 

Name:	48ba3442-ec20-4602-9c09-397476c841c6_zpsnduwxkqn.jpg 
Views:	376 
Size:	135.2 KB 
ID:	17657Click image for larger version. 

Name:	IMG_1515_zps5e7d0055.jpg 
Views:	387 
Size:	79.1 KB 
ID:	17658Click image for larger version. 

Name:	IMG_1514_zps11cdf35a.jpg 
Views:	405 
Size:	85.9 KB 
ID:	17659Click image for larger version. 

Name:	IMG_0615.jpg 
Views:	495 
Size:	140.5 KB 
ID:	17660
    Last edited by bakes; September 23rd, 2016 at 15:20.
    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  2. #2
    Registered User BigD2500HD's Avatar
    Join Date
    Apr 2013
    Location
    California
    Posts
    115
    Can I just trade you hoods?

  3. #3
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294
    bumping to the top!
    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  4. #4
    Registered User
    Join Date
    Jun 2011
    Location
    Portland, OR
    Posts
    34
    Quote Originally Posted by bakes View Post
    bumping to the top!

    Will you be posting current pics?
    '03 RS6: Ebony Black Pearl/Silver, CF interior. Eurocharged Stage 2 (amazing!), MTM TCU, LED tails, V1 radar (essential), 25% Carbon tint.

  5. #5
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294
    I will once I swap back to summer wheels in the next month or so.
    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  6. #6
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294
    Price drop to 19K. Will be getting the timing belt done next week and will also assess the rear brakes. After that the car shouldn't need anything but oil changes until the next TB job.

    I also plan to put the summer wheels back on after the TB and will post current pics!
    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  7. #7
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294





    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  8. #8
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294

    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  9. #9
    Registered User nistah's Avatar
    Join Date
    Nov 2010
    Posts
    566
    Those seats tho. Dibs If you ever consider putting the US spec seats back in, PM me I have a set of US spec seats in charcoal in exceptional condition + cash to offer. GLWS

    Quote Originally Posted by ba



    kes;287092





    Current: Black Pearl Metallic Effect/Ebony, RNS-E, Euro + pedals, oCarbon, Hotchkiss Front & Rear Sway Bars, Koni Yellow's

  10. #10
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294
    Timing belt job - done
    spark plug replaced
    air filters/cabin filters replaced
    rear bushing replace
    oil change done

    Car is ready to go!
    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  11. #11
    Registered User
    Join Date
    Jun 2011
    Location
    Portland, OR
    Posts
    34
    Quote Originally Posted by bakes View Post
    Timing belt job - done
    spark plug replaced
    air filters/cabin filters replaced
    rear bushing replace
    oil change done

    Car is ready to go!

    What is the current mileage and what are you asking for the car? Thanks!
    '03 RS6: Ebony Black Pearl/Silver, CF interior. Eurocharged Stage 2 (amazing!), MTM TCU, LED tails, V1 radar (essential), 25% Carbon tint.

  12. #12
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294
    At 109k miles. 19-20k is what I'm looking to get now that I've just spent 3.5k. I'd rather keep it otherwise.
    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  13. #13
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294
    I've found a replacement avail locally I like. 18.5 k for any interested buyers!
    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  14. #14
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294
    Price now 18k obo...I've got a replacement lined up and am motivated to sell. To get this car back over the border would cost the buyer approx $400 and then shipping.



    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  15. #15
    Registered User RSSIK's Avatar
    Join Date
    Apr 2010
    Location
    NJ
    Posts
    244
    what is the et and size of your wheels?
    they call me Tank

  16. #16
    Registered User kruat's Avatar
    Join Date
    Mar 2014
    Location
    Longview, WA
    Posts
    393
    18k US or Canadian?
    -Mike-
    03 RS6 Mugello/Ivory #905565
    01 S4 Casa/sport/6spd

  17. #17
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294
    US...price drop to 17K USD as I am motivated to sell!

    Wheels are 19*10 with et of 35 I think but I'm running a 6mm spacer all around as the front rims hit the upper control arm even with the nub ground off.

    I can get the car shipped via train from Toronto to Vancouver for approx $900cdn and then import it from there.
    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

  18. #18
    Registered User bakes's Avatar
    Join Date
    Mar 2010
    Location
    Near Toronto, Ontario
    Posts
    294
    Sale pending...
    ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •