RS6 floor mats?

**Soks** · February 3rd, 2014, 07:08

Hey,
im wanting to get a new set of floor mats for the RS6. I contacted the dealer, but they've been giving me the run around when I provide them with my vin # saying that they don't show any matches? Do any of you have a part # for the basic black mats (no logos). Or know of an aftermarket site offering essentially the same mats? Thanks for your help.

**Other_Erik** · February 3rd, 2014, 12:38

Got 'em. I'm 99% certain these do _NOT_ have logos. If they are the OE mats WITH RS6 logos, I will happily trade you my no-logo mats plus some cashola.

4B7 061 225 EA7 EX = Front
4B3 061 226 EA7 EX = Rear

O_E

**Soks** · February 3rd, 2014, 16:29

Thanks a lot, I'll look into these.

**bmlee007** · February 3rd, 2014, 23:03

I checked into this a little over a year ago. I could get a set from (an insider at) Audi in Neckarsulm with the RS6 logo only on the fronts, for close to $600 with shipping. They were only available in black, and as previously stated, RS6 logo only on the fronts.

Once in a while, you can find a set on ebay.de that is made for the 2.7T C5. They'll be made with logos on the fronts and rears, but not an exact fit. See here...

http://www.ebay.de/itm/Audi-RS6-4B-a...item3a8b22468d

Even though it says RS6 4B (for ROW, C5 for the US) they are most likely fitting the 2.7T. The difference is, the 2.7T transmission tunnel is different, the 4.2 is slightly wider, so the mats listed above will not be an exact fit. However, with a heat gun and a little time, they can be "formed" to the tunnel. You'll have the logo front and rear, and save $500 or so after shipping.

The best (near-factory) option I was able to find Stateside was about 6 or 8 months ago, there was ONE (1, un, uno, una, eine) ebony set in a warehouse in NJ for around $380, that was made to fit the 4.2L. If they're still available, you could have someone custom embroider the logo, and then be big pimpin' for a little less than factory.