Wondering if the red is really gonna be too stiff and vibrate all to hell.
Looking for input from those who have tried either or both!
Thanks,
Matt
Wondering if the red is really gonna be too stiff and vibrate all to hell.
Looking for input from those who have tried either or both!
Thanks,
Matt
03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs
I have the blue, firms things up and depending on the mileage, all four rubber prongs might be cracked or broken...
SOLD - 03 RS6 Avus (905355)
Current - 03 Toyota Tacoma 4x4 double cab - the YETI, lifted, winched, snorkeled, lockered, skidded, geared
I went with the blue on recommendation on this board. No complaints about the result. Upgrade the engine mounts while you are at it. (?) I did because I had an engine mount code.
2003 RS6, Mugello/Silver, MTM Stage 1 ECM, and TCM mod, Abt 19 inch wheels for summer, stock 18s for winter, RS6+ Pedals INSTALLED! 2Bennett coilover system, 2Bennett front brakes; DRC gone!
Thanks for the input guys!
03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs
The side mount one here... Not mine. Just happened to see it.
http://www.audizine.com/classifieds/...iffness&cat=17
03 RS6 :: 01 allroad
I went with the red poly for both of these.
I do get a slight humm around 58mph. Not unbearable but its there. I am going to check my driveline angle and potentially adjust if need be.
03 RS6 Daytona Grey - EFI Express - 01e - SRM K24 - Aquamist - 495whp/580ft-lbs