Rotors, Pads, Lines and Fluid in!! Let you know how it feels after I find the time to install..................
Rotors, Pads, Lines and Fluid in!! Let you know how it feels after I find the time to install..................
03 RS6, VIPER ECU, MTM TCU, Milltek Full Catless Non Res setup from Turbos to the boxes(ROAR'S), H&R Coilovers, Hotchkiss ARB's, 19x10's with 275-30-19 PSS's at each corner, Kenwood 9960 Head unit, V1 Radar Locator. 517 Trans Rebuild, ScrollProducts Turbo Rebuild.
Be nice to here how the 2Bennett rotors work out, they look good. Do you know who makes the rotors for them?
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
Oh man..those are trash can lids!!!!!
2013 Audi S8
03' RS6 - Mugello Blue, Ebony Interior. 19" V710's
Sold - 06 6SP Silver B7 S4 - APR Exh, piggies, JHM ECU, VMR V708's
Sold - 01.5 B5 S4 6-Speed - Neuspeed Exhaust, GIAC-X ECU, Shifter, VMR V708's
Ken at 2Bennet said that Brembo makes the Rotors for them. These are what they run on their Track car ( That's what I like, Tried and Proven) and Claim they work very well. With the fully floating rotors and pagid pads he claims minimal to no noise or squealing and low Brake dust. I'll report on that after I install........................
03 RS6, VIPER ECU, MTM TCU, Milltek Full Catless Non Res setup from Turbos to the boxes(ROAR'S), H&R Coilovers, Hotchkiss ARB's, 19x10's with 275-30-19 PSS's at each corner, Kenwood 9960 Head unit, V1 Radar Locator. 517 Trans Rebuild, ScrollProducts Turbo Rebuild.
Really looking forward to your testimonial. I'll be ready to get some in a couple weeks.
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
It looks like the drill pattern is the same. Are the cooling vanes straight or curved on the 2Bennett?
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
I don't know whether I want to go Coleman or 2bennett...Coleman pricing is more attractive...
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
They appear to be straight. There is no right or left Rotor, even though the Hole pattern is unidirectional. We'll have to see how that goes. Anyway moving right along, the Pagids gave me a hard time to install. The Anti-squeal plates made it awfully difficult to fit the Pads. I had to actually Grind of the ends of the Plates to make the pads fit. Got them installed now. Just have to determine the best Bedding procedure. Don't feel like doing 100mph just to get nailed, so I'll wait till later on.......
03 RS6, VIPER ECU, MTM TCU, Milltek Full Catless Non Res setup from Turbos to the boxes(ROAR'S), H&R Coilovers, Hotchkiss ARB's, 19x10's with 275-30-19 PSS's at each corner, Kenwood 9960 Head unit, V1 Radar Locator. 517 Trans Rebuild, ScrollProducts Turbo Rebuild.
I guess you will have no need for frozen rotors then...
SOLD - 03 RS6 Avus (905355)
Current - 03 Toyota Tacoma 4x4 double cab - the YETI, lifted, winched, snorkeled, lockered, skidded, geared
So far so good. Initial cold bite is excellent. No need for warm up. Did a few Stops from 100mph, very little to no Fade at all. No Vibrations at all. No Squeals or Sqeaks, completely Silent. Probably due to the True Fully Floating nature of the Rotor and the Pagid Black Pads. All in All I am quite happy with the purchase so far. More Expensive, but seem to be well worth it. How they perform at the Track, I can't say. But the boys at 2Bennett use the same rotors to race with but use a different pad. For a Street setup this is way more than adequate and will definitely stop you in a hurry. Still watching the Dust situation, but so far it seems to be quite Minimal........
03 RS6, VIPER ECU, MTM TCU, Milltek Full Catless Non Res setup from Turbos to the boxes(ROAR'S), H&R Coilovers, Hotchkiss ARB's, 19x10's with 275-30-19 PSS's at each corner, Kenwood 9960 Head unit, V1 Radar Locator. 517 Trans Rebuild, ScrollProducts Turbo Rebuild.
Price update:
partsgeek has rotors for 277/front and 284/rear.
also, if you make 2 separate orders, you can save an additional 15.
use coupon code save 15 on each order to save 15 dollars each.
will update on quality when they arrive.
Last edited by JSRS6; February 20th, 2013 at 12:46.
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
I got the JHM ones and overall I am very happy as well. The previous owner had the EBC redstuff. I hated those pads. I went with the stoptech pads and these rotors. Not only is the dust very low, there is no vibration and the responsiveness seems good.
03' RS6 - Mugello Blue, Ebony Interior. 19" V710's
Sold - 06 6SP Silver B7 S4 - APR Exh, piggies, JHM ECU, VMR V708's
Sold - 01.5 B5 S4 6-Speed - Neuspeed Exhaust, GIAC-X ECU, Shifter, VMR V708's
Received my fronts this morning on my doorstep, and i can confirm these are OE. The rears will be here on the 27th. Will update when those come in.
$549 for front rotors
$523 for rear rotors
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
03 RS6 | Daytona Gray on black | KW V3 | Rotiform 19x10 Wheels | REVO ECU | MTM TCU | 170k miles and counting..
"Some people play hard to get... I play hard to want."