Cheapest price on OEM rotors right now

**Elevens** · February 7th, 2013, 21:05

Rotors, Pads, Lines and Fluid in!! Let you know how it feels after I find the time to install..................

**hahnmgh63** · February 7th, 2013, 23:49

Be nice to here how the 2Bennett rotors work out, they look good. Do you know who makes the rotors for them?

**ttboost** · February 7th, 2013, 23:56

Oh man..those are trash can lids!!!!!

**Dynmicracr** · February 7th, 2013, 23:59

Originally Posted by JSRS6

Well that's interesting. Different drill pattern, more holes, arrow pattern. These are zimmermans. I wonder which is better? I want to call them up and see why they send oe style instead of oem rotors with that pn.

Look at the bolt pattern too. That is a one size fits all pattern. Interesting.

**Elevens** · February 8th, 2013, 04:40

Originally Posted by hahnmgh63

Be nice to here how the 2Bennett rotors work out, they look good. Do you know who makes the rotors for them?

Ken at 2Bennet said that Brembo makes the Rotors for them. These are what they run on their Track car ( That's what I like, Tried and Proven) and Claim they work very well. With the fully floating rotors and pagid pads he claims minimal to no noise or squealing and low Brake dust. I'll report on that after I install........................

**JSRS6** · February 8th, 2013, 11:56

Really looking forward to your testimonial. I'll be ready to get some in a couple weeks.

**JSRS6** · February 8th, 2013, 11:57

Originally Posted by Dynmicracr

Look at the bolt pattern too. That is a one size fits all pattern. Interesting.

The drill pattern comment was my brain farting. The rear drill pattern is different than the front, on OEM at least.

**hahnmgh63** · February 8th, 2013, 14:10

It looks like the drill pattern is the same. Are the cooling vanes straight or curved on the 2Bennett?

**ben916** · February 8th, 2013, 18:15

Originally Posted by Elevens

Ken at 2Bennet said that Brembo makes the Rotors for them. These are what they run on their Track car ( That's what I like, Tried and Proven) and Claim they work very well. With the fully floating rotors and pagid pads he claims minimal to no noise or squealing and low Brake dust. I'll report on that after I install........................

Holy CRAP!!! those are amazing!!!

Link please!!!

**JSRS6** · February 8th, 2013, 18:27

http://www.2bennett.com/audi%20rs6.html

**JSRS6** · February 8th, 2013, 18:29

I don't know whether I want to go Coleman or 2bennett...Coleman pricing is more attractive...

**Elevens** · February 8th, 2013, 22:14

Originally Posted by hahnmgh63

It looks like the drill pattern is the same. Are the cooling vanes straight or curved on the 2Bennett?

They appear to be straight. There is no right or left Rotor, even though the Hole pattern is unidirectional. We'll have to see how that goes. Anyway moving right along, the Pagids gave me a hard time to install. The Anti-squeal plates made it awfully difficult to fit the Pads. I had to actually Grind of the ends of the Plates to make the pads fit. Got them installed now. Just have to determine the best Bedding procedure. Don't feel like doing 100mph just to get nailed, so I'll wait till later on.......

**ben916** · February 8th, 2013, 23:53

I guess you will have no need for frozen rotors then...

**Elevens** · February 20th, 2013, 06:38

So far so good. Initial cold bite is excellent. No need for warm up. Did a few Stops from 100mph, very little to no Fade at all. No Vibrations at all. No Squeals or Sqeaks, completely Silent. Probably due to the True Fully Floating nature of the Rotor and the Pagid Black Pads. All in All I am quite happy with the purchase so far. More Expensive, but seem to be well worth it. How they perform at the Track, I can't say. But the boys at 2Bennett use the same rotors to race with but use a different pad. For a Street setup this is way more than adequate and will definitely stop you in a hurry. Still watching the Dust situation, but so far it seems to be quite Minimal........

**JSRS6** · February 20th, 2013, 12:11

Price update:

partsgeek has rotors for 277/front and 284/rear.

also, if you make 2 separate orders, you can save an additional 15.

use coupon code save 15 on each order to save 15 dollars each.

will update on quality when they arrive.

**Dynmicracr** · February 20th, 2013, 17:19

I got the JHM ones and overall I am very happy as well. The previous owner had the EBC redstuff. I hated those pads. I went with the stoptech pads and these rotors. Not only is the dust very low, there is no vibration and the responsiveness seems good.

**JSRS6** · February 21st, 2013, 16:51

Received my fronts this morning on my doorstep, and i can confirm these are OE. The rears will be here on the 27th. Will update when those come in.

$549 for front rotors

$523 for rear rotors

**Brav** · February 22nd, 2013, 05:13

Originally Posted by Dynmicracr

I got the JHM ones and overall I am very happy as well. The previous owner had the EBC redstuff. I hated those pads. I went with the stoptech pads and these rotors. Not only is the dust very low, there is no vibration and the responsiveness seems good.

Good to hear about the JHM and Stoptech pads. I was going to try those pads next. No fade from super hard stops from say 90+?

Thread: Cheapest price on OEM rotors right now

Thread Tools

Rate This Thread

Display

Posting Permissions