Mugello Blue C5 RS6 Avant Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Wowza. That's beautiful. I like the Seat Cupra lip added to the RS6 front bumper!
Do you have any tire rubbing issues with the 275s?
EDIT: I want those taillights for my S6! Where did you get them?
..no tire rubbing issues...taillights are from dectane...
https://www.dectane.de/product_info....a120dccfd9ec47
Mugello Blue C5 RS6 Avant Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
looks great . what suspension are you running on?
Ex.: 2004 Audi RS6 C5 ABT, Milltek non-resonated, 19" RS4 B7 rims, RNS-E - SOLD
2004 AUdi RS6 C5, SE exhaust, RNS-E, 19' original rims - SOLD
Now :2009 Audi RS6 C6 - stock yet pretty fast
Supercharged??
Also, seems like a lot of wheel weights on there. over 4 oz on one corner. I wonder if its the wheels or the tires? Looks good!
03 RS6 | Daytona Gray on black | KW V3 | Rotiform 19x10 Wheels | REVO ECU | MTM TCU | 170k miles and counting..
"Some people play hard to get... I play hard to want."
its actually for sale...
http://www.ebay.de/itm/Audi-RS6-SPOR...19931298670752
Mugello Blue C5 RS6 Avant Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Ya, why the supercharged badge? And the sportec stickers on the stock brembo's?
I like the wheels. And surprisingly, I kind of like the red calipers.
Avus Silver RS6 - Viper Stage 2 ECU/TCU - Water/Meth Injection - Frozen Rotors - Hbars - clear corners - Hella smoked tails - gutted precats
it's a lot of weight on the wheels, probably cheap rims and tires....i wouldn't do it just for the good looks, it's too dangerous on any car especially on one like this...
Ex.: 2004 Audi RS6 C5 ABT, Milltek non-resonated, 19" RS4 B7 rims, RNS-E - SOLD
2004 AUdi RS6 C5, SE exhaust, RNS-E, 19' original rims - SOLD
Now :2009 Audi RS6 C6 - stock yet pretty fast
well, the rs5 got them too...
Mugello Blue C5 RS6 Avant Viper Tuning ECU/TCU
MTM Bimoto wheels 9,5 x 19 ET 30 LK 5x112 with 275/30/19 tyres
MTM exhaust system cat back 4-pipe with throttle valves in 2 pipes, control
Beautifully put together.......did it take alot of fabrication to get that lip to seat flushly with your front bumper?
These are the rim style I'd love to put on my RS. I know Hartmann sell them with a hub that suits our cars and a 25mm offset aswell. Those on the car above look to be at least 20's so that is a bit big for me as I fear the ride may be too harsh. I'll look further into the Hartmann ones in a few months or so.
ECU/TCU chip, Euro Recaro's, KW 3's, Wagners, Venair hoses, Dahlback diverters, Hotchkis sways, Phaeton ducts, lower spoilers, custom vent's in hood
How can i get a lip like that?
Cupra lip is a 20 minute job... use stainless steel self-tapping screws and don't f-up your bumper.
Here's a set of those wheels on eBay right now...
20" Titan OEM RS5 Wheels in, uh, Slovenia
i know, but i am not sure these are OEM, could be fakes, this would explain the large amount of weight used to balance it...either the rims or tires are cheap, about the tires i am pretty sure, can't tell the same about the rims as it's hard from these pictures to tell...fakes look just the same as OEM nowadays...
Ex.: 2004 Audi RS6 C5 ABT, Milltek non-resonated, 19" RS4 B7 rims, RNS-E - SOLD
2004 AUdi RS6 C5, SE exhaust, RNS-E, 19' original rims - SOLD
Now :2009 Audi RS6 C6 - stock yet pretty fast
Odds are that the rims are clones, but hard to say. Take a rim with slight off balance and mate it with a tire with slight off balance and you have 25% chance of the two balance problems matching up on the same side. I personally would have removed the tire and rotated it 180 and remounted. That should have dropped the weight differential substantially.
I've always loved this color combination on a car. Being an RS6 avant is just that much more appealing. Such a shame that we can't even import cars like this to North America.
'02 S6 Avant Silver - Pokey | Carbon Black/Ebony RS6 w/ stuff - darn quick | '03 Daytona Grey/Ebony RS6 w/ more stuff - quicker yet | '91 NSX CDN issue with 6spd & BBSC - quicker yet and then some | '87 Buick GNX OEM clone w/ lots of stuff - quickest hands down