Yep, I'm stumped on this one and I don't have the part it mounts to handy to check it.
If you don't know what it is, this is the socket that the cleco-type fastener clips into to hold down the front of the CF engine cover.
I need the P/N for this piece and the nut that secures it.
2012 Q7 TDI S-Line - 2010 GTI - 2007 A3 3.2 S-Line - 2003 RS6
2001 Honda S2000 - 1977 Honda CBR 750-F2 - 1965 GMC 1500 WideSide
Searched for that before. Iirc, ETKA lists the bracket with those installed as the lowest replaceable unit.
Avus RS 6, RNS-E/BT/RVC, Eurocharged/MTM, SuperSports, PSS9/Hotchkis, SS Lines/EBC Reds, FMU/BMC, Sportec vents, 007's, 9500ci, Black Optics/Headlights/Trim/Rims, CC; coming soon: stage 3 snow meth
I got it... but you aren't gonna be happy about the price.......
077103733
Price $24.18
ETKA page 103-80 #7 & #8
SOLD - 03 RS6 Avus (905355)
Current - 03 Toyota Tacoma 4x4 double cab - the YETI, lifted, winched, snorkeled, lockered, skidded, geared
Ben u are a machine!
Ebony/Black, DBR Stage 3 race kit, -SOLD :( 996TT Proto 650 basically a sardine can with a rocket attached to the back...11' CTS-V, 540/579RWP hehehehe ;)
ETKA is a life saver!Originally Posted by speedtrapped
I have a little nerd notebook that I look up parts that are missing on my car and just happened to have it handy.
The other thing that is missing on mine is the two rubber grommets on top of the intake manifold that the OEM airbox "snaps" into...
SOLD - 03 RS6 Avus (905355)
Current - 03 Toyota Tacoma 4x4 double cab - the YETI, lifted, winched, snorkeled, lockered, skidded, geared
Thanks Ben.
I had this written down but the diagram had me second guessing.
That price does suck, too.
2012 Q7 TDI S-Line - 2010 GTI - 2007 A3 3.2 S-Line - 2003 RS6
2001 Honda S2000 - 1977 Honda CBR 750-F2 - 1965 GMC 1500 WideSide
Also, I couldn't find the bracket that these pieces are attach to?
You have the P/N for it, too?
2012 Q7 TDI S-Line - 2010 GTI - 2007 A3 3.2 S-Line - 2003 RS6
2001 Honda S2000 - 1977 Honda CBR 750-F2 - 1965 GMC 1500 WideSide
Yes...
077103947 - but Genuine website is down?!?!?
SOLD - 03 RS6 Avus (905355)
Current - 03 Toyota Tacoma 4x4 double cab - the YETI, lifted, winched, snorkeled, lockered, skidded, geared
Bringing this back from the dead....
I managed to find the bracket, but does anyone have a spare one or two of these pieces along with the nut that secures it to the bracket?
2012 Q7 TDI S-Line - 2010 GTI - 2007 A3 3.2 S-Line - 2003 RS6
2001 Honda S2000 - 1977 Honda CBR 750-F2 - 1965 GMC 1500 WideSide
I have a spare capture lug, will be happy to send to you, pm mailing address (thanks again for the windshield wiper post cap!), but still looking for spare nuts to fasten them with. Threading is M12x1 , and the smallest I can find readily available is M12x1.5 locally or M12x1.25 on the interwebs.
Anyone with a good parts/fasteners catalog want to chime in on pricing for a hex nut or three so I can drop in my spare parts bin? M12 nut, 1mm thread pitch, 6mm or less height...
O_E
#905530 - Brilliant Black on Ebony. Sorted, running strong, ready for a new owner.
No, I am not the board admin - that's Erik (from Sweden), I'm Other_Erik (from the US)
Quick update, may have found a nut that'd work...
http://www.fastenal.com/web/products/details/11508267
Not sure if it's short enough to fit the gap, but worth a shot, right?
$1.58/ea at wholesale, no idea what the price would be to pick up a single or a couple to have spares...
O_E
#905530 - Brilliant Black on Ebony. Sorted, running strong, ready for a new owner.
No, I am not the board admin - that's Erik (from Sweden), I'm Other_Erik (from the US)
Part request here as well:
the rubber grommets (2) that the air box middle support posts sit in on the intake
TIA
GBNF: Mugello, silver, carbon, RNS-E, H&R coilovers, Hotchkiss
'14 GL550
'79 911SC Targa
I got some grommets with my valve cover gasket set that fit perfectly. I don't know what they were actually for, but it came with 4 of them. I used two to replace my cracked grommets, and I can't remember if I kept the other two or threw them away..
RS6 #1, 01E, 2.5" straight pipes, AMD Stage 1 6MT tune, 460awhp/530awtq on AMD's Mustang dyno. TOTALLED.. RS6 #2, Ebony Black Pearl on black/silver combination with carbon, up and running with 6 gears and AMD tune.
if you find them, let me know...
meantime does anyone have a part nbr for them?
GBNF: Mugello, silver, carbon, RNS-E, H&R coilovers, Hotchkiss
'14 GL550
'79 911SC Targa
Audi doesn't list a part number for the little piece of rubber that covers the support post. Just like many other small parts, they want you to spend $$$ on a larger assembly. Your best bet is to run over to Home Depot/Lowe's/Ace hardware, and get yourself a piece of rubber tubing. I had some laying around in my garage, I believe it was either 1/4" or 3/8" ID tubing, thin wall. I jammed it over the end of the post and it now sits exactly as it should on the post itself, holds the front intake cover in place just fine.
#905530 - Brilliant Black on Ebony. Sorted, running strong, ready for a new owner.
No, I am not the board admin - that's Erik (from Sweden), I'm Other_Erik (from the US)
I cut tubing too like OtherErik mentioned when one of my rummer grommets went missing. Just kept trimming it with a an exacto knife til i liked the fit.
Thanks gents!
GBNF: Mugello, silver, carbon, RNS-E, H&R coilovers, Hotchkiss
'14 GL550
'79 911SC Targa
Ask DHall1, as I sold them to him. He has the part numbers.
They are listed in ETKA but a challenge to find.
SOLD - 03 RS6 Avus (905355)
Current - 03 Toyota Tacoma 4x4 double cab - the YETI, lifted, winched, snorkeled, lockered, skidded, geared
Posting Permissions
Reply With Quote