http://www.aemelectronics.com/water-...ne-engines-51/
Just wondering if anyone ever did this, or is this just a waste of money?
http://www.aemelectronics.com/water-...ne-engines-51/
Just wondering if anyone ever did this, or is this just a waste of money?
Paul in the UK did this on his RS6 and it made a huge difference... There is a thread on AudiSRS or RS246 somewhere, I'll try and find it a post for you.
RS6 Avant, Miltek Res, ITG's, APR R1's, PSS 9's, H&R Sway Bars and Wangers intercoolers in the post.....
Of course, if you install any AEM parts, it's required that you install a "shocker" sticker somewhere on the vehicle. I'm serious, it's a federal law that was pushed through by the rice lobbyists.
Pat - Eisenmann race exhaust, Catless downpipes, KW V3's, H-Sport sways, 034 Control arms, Apikol diff mount, Sterns motor mounts, Forge dv's, Stainless brake lines, Venair hoses, Sportec vent mod, Euro tails, Viper Tuned ecu/tcu, DPE S20's 19x9.5, 275/30/19's
i did this on my mr2turbo...it worked pretty well... especially in the summer. I didn't have the dyno numbers to prove it, but i'm sold on the idea.
Pat - Eisenmann race exhaust, Catless downpipes, KW V3's, H-Sport sways, 034 Control arms, Apikol diff mount, Sterns motor mounts, Forge dv's, Stainless brake lines, Venair hoses, Sportec vent mod, Euro tails, Viper Tuned ecu/tcu, DPE S20's 19x9.5, 275/30/19's
that was the brand i had...i stil have it on my "duece".. too bad it aint runnin
hmmm... APR chip woud do we with this... but do researh a little about the effect of methenol on the internal seals.. i recall somethin about it
Pat - Eisenmann race exhaust, Catless downpipes, KW V3's, H-Sport sways, 034 Control arms, Apikol diff mount, Sterns motor mounts, Forge dv's, Stainless brake lines, Venair hoses, Sportec vent mod, Euro tails, Viper Tuned ecu/tcu, DPE S20's 19x9.5, 275/30/19's
Avus Silver RS6 - Viper Stage 2 ECU/TCU - Water/Meth Injection - Frozen Rotors - Hbars - clear corners - Hella smoked tails - gutted precats
Pat - Eisenmann race exhaust, Catless downpipes, KW V3's, H-Sport sways, 034 Control arms, Apikol diff mount, Sterns motor mounts, Forge dv's, Stainless brake lines, Venair hoses, Sportec vent mod, Euro tails, Viper Tuned ecu/tcu, DPE S20's 19x9.5, 275/30/19's
I have had an Aquamist kit on my 996 Turbo for 2 years ...no issues. I have taken advantage of plug changes to look at pistons and cylinder,etc...no issues....