Update 0-60 in 4.0 and 4.1- Vag Log shown

[MaxRS6]

I took the spare out, golf clubs out, and turned off ESP. Put in "S" and took off. I had my nephew with me and we did a couple runs. We had a 4.1 and a 4.0 from 0-60 per Vag-Com. The car was pulling great! We let off at about the 92 mph mark as we were on a short straight.

Yahoo and I think that is pretty good for the heavy hog!!!

I'm having new coil wires installed tomorrow to correct the intermittent coil wire error on cylinder 8. I'll then do a couple more runs to see if there is any difference.

[ttboost]

Very nice!!! However, who takes someone with them when they do performance measuring? Do I smell a 3.9?

[MaxRS6]

Very nice!!! However, who takes someone with them when they do performance measuring? Do I smell a 3.9?

Next time though- his dead weight is out of the there.

[V8weight]

LOL- I have to as I have no credibility

That's right, I need to hear the nephew's witness testimony or it didn't happen

[MaxRS6]

Hey!!! I resemble that remark.

[ttboost]

Have you ever dyno'd your car and know what it weighs? Based on the numbers, I'm guessing stock weight (4000lbs?) and 400ish awhp?

[MaxRS6]

Have you ever dyno'd your car and know what it weighs? Based on the numbers, I'm guessing stock weight (4000lbs?) and 400ish awhp?

and am thinking about finding a place to do it as I would like to see the info. I don't know of a dyno around my area so I think Dallas may be my best bet.

How about it out there- Anyone have suggestions for a dyno in the Dallas area they would recommend?

[ttboost]

http://www.racperformance.com/?//

[MaxRS6]

Thanks TTboost- I'll contact them when the time draws nearer.

[V8weight]

and am thinking about finding a place to do it as I would like to see the info. I don't know of a dyno around my area so I think Dallas may be my best bet.

How about it out there- Anyone have suggestions for a dyno in the Dallas area they would recommend?

Doesn't "Safe4now" on this board own a shop with a dyno in the Dallas area?

[MaxRS6]

That would work out great as Steve is helping organize the DE event I'm attending in April. I'll check with him as well. Thanks Pat.

[JRS-RS6]

Look here: http://www.mustangdyne.com/locator.htm

Autoscope Motorsports 5134 Denton Drive
Dallas, TX 75325
(214) 350-3050 MD-AWD-500

COBB Tuning of Plano 1200 Placid Ave. Ste. 550
Plano, TX 75075
(214) 291-3020 MD-AWD-500

Forced Induction Systems 10040 Champion Lane
McKinney, TX 75071
(972) 346-2401 MD-AWD-500

KanTuning.com 10011 Harmon Rd. Suite #135
Fort Worth, TX 76177
(817) 683-5715 MD-AWD-500

M2M International 1904 W. Howard Lane
Austin, TX 78728
(512) 837-6200 MD-AWD-500

I just put the ones with AWD dyno's from Mustang.

[MaxRS6]

JRS-RS6:
You don't mess around! Thanks for the info and I am going to add a dyno run to my April Dallas trip. It is one more thing to look forward to on the trip. I think the Autoscope shop is Safe4now's (Steve) shop from his earlier emails and will be my first choice.

[JRS-RS6]

Check this clip out: http://www.awe-tuning.com/media/mult...est_110303.wmv

Same dyno set up AWE Tuning GIAC chipped car from http://www.awe-tuning.com/pages/gallery/rs6/index.cfm

[MaxRS6]

Check this clip out: http://www.awe-tuning.com/media/mult...est_110303.wmv

Same dyno set up AWE Tuning GIAC chipped car from http://www.awe-tuning.com/pages/gallery/rs6/index.cfm

in the hp being cranked out. I'm stoked about the TMS DE and this just adds to the fun!

[DHall1]

I used my clubs today. Played the longest course in AZ. Kicked my ass but I could hang with the boys that have been playing 30+ years.

72 degrees and sunny.

Then I had time to wash up the beast and take her for spin. AcesIV is well worth every penny.

[p3u]

Have you ever dyno'd your car and know what it weighs? Based on the numbers, I'm guessing stock weight (4000lbs?) and 400ish awhp?

Car weighs about 4200lbs dry. I weighed mine at 4280 with half a tank.

[MaxRS6]

Darn you Dhall!!!!!!!

Sounds like a great day!