These are nice looking units. I would go for the complete kit and remove the fogs to open up additional frontal area.
Only problem for me. Mine are fine for now and Fidelity covers my car for 5 more years.
Hmmm, "if" mine leak in the future....I could specify these as replacement. Hmmmm
look carefully...often you didn`t noticed the leak(s) !!! I made the experience by myself...
mfg
Daniel
RS6plus -- blue pack -- h&r suspension -- 20" rs6 c6 wheels -- fully loaded and wagner cooled !
I knew my right one was leaking as their were obvious signs of an oil residue where no oil could possibly have spilt on a corner of the intercooler. I thought my right one was probably good but until I removed it I also saw signs of leaking, although not as bad as the right one. I rigged a pressure test set-up for leaking but my set-up leaked so I'm going to get some more fittings and rig a better one for light pressure testing. I won't go above 15lbs in testing which should be more than sufficient.
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
Guy's, for your info, Grizz swears by these IC's, has them fitted to his car, and I am next.
You can trust Carsten and his figures.
BTW I have the Wagner hoses. My old OEMs were being blown off every 5 minutes. with these no more problems- top product.
Mooch
So fast, it will re-arrange yer trousers!!
If I have the venair silicon hoses kit, do i still need to get these hoses kit from Wagner?
"Aerodynamics are for people who cannot build engines"...... Enzo Ferrari
No, your hoses should work fine.Originally Posted by vangelis
Pat - Eisenmann race exhaust, Catless downpipes, KW V3's, H-Sport sways, 034 Control arms, Apikol diff mount, Sterns motor mounts, Forge dv's, Stainless brake lines, Venair hoses, Sportec vent mod, Euro tails, Viper Tuned ecu/tcu, DPE S20's 19x9.5, 275/30/19's
Thanks V8weight
"Aerodynamics are for people who cannot build engines"...... Enzo Ferrari
The OEm Ducts need to cut a bit to fit on the Bigger Intercoolers...
and here some Pics on the Hose Kit, they come with 12mm Norma Clamps
Its no problem if you want the Kit in Pieces... just Pick a Part and let me know...
how can we order?
2003 RS6 - forsale
just send me an Email
info@wagner-tuning.de
I dont think 034 Motorsports will like the manufacturer going direct to the US market.
I dont know but thats just me.
We dont see the dealers on this forum but the dealers have to pay to advertise the products on other forums. 034 Motorsport does pay to advertise these Wagner intercoolers to the Audi community.
Even VMR stopped short of cutting off their dealers with our purchase of rims. VMR did not wish to short change their dealer network and Audi community.
Just a thought.
Thanks for sharing your Mind, but there are not only Americans on this Forum.
It depense where the Order is Coming from, we are forwarding these Orders to the Distributors in the different Countrys... to make sure, the Customer is getting the best Service.
^^ Oh good. That is more than fair.
Lupo, I would suggest you guys come up with the 2 extra intercooler hoses and make a 6 hose kit like the Venair hoses. I wouldn't want to replace 4 of the 6 hoses and leave 2 old rubber hoses on the car. I also used the heavier duty constant Torque hose clamps on my car, much better than OEM, especially when running higher boost.
Guys, I highly recommend the Wagner intercoolers, the intercooler quality is excellent. I did the whole kit with ducting but I could go either way on the ducts.
2003 White RS6 2013 Midnight Blue S5
2013 Daytona RS5 2x944 Turbo's 1974 911 w/'91 3.6ltr motor
Roy, WA
Carsten, are you able to supply these or are they an Audi item?the additional Water coolers ( all Cars with hot weather Package, RS6 plus and US Models equipped with these)
are mounted behind the Intercooler
and here some numbers...
Also, are the figures with or without the additional water coolers (both stock and yours)?
On the drive today : RS6 C5 saloon/sedan, S4 B5 saloon/sedan, S2 ABY Coupe
Gone but not forgotten : S8 D2 FL
Hello Clive,
yes, these are in Stock.
http://wagner-tuning.de/produkte/200001010RS6LLK.php
You can get them also at Unit20 or MRC. The Audi OEM Intercooler is smaller and always leaking.
The Graph is made on a regular RS6 without additional Watercoolers. The Watercoolers behind the Intercooler are only on the RS6 plus and Cars with Hot Weather Package (all US Cars so far)
Thanks Carsten. Do you also supply the RS6+ watercoolers or are these an Audi part? In fact, are they necessary at all with your ICs?
On the drive today : RS6 C5 saloon/sedan, S4 B5 saloon/sedan, S2 ABY Coupe
Gone but not forgotten : S8 D2 FL
These are a OEM Audi Part. You dont need to buy these, they are not necessary!
Figured why not... enough ppl seem to be happy with them, I have the whole kit coming.
I sould be able to get before and after Dyno info as well. My thoughts are:
Leave car parked overnight in Dyno room
May pre-runs and log data
Install I/C's
Leave car parked in Dyno room
Perform after install runs and log data
Should be interesting, I want to get them done in time for the Texas Mile end of this month!
More to follow
Steve
"You have first to experience what you want to express" (V. Van Gogh)
Posting Permissions
Reply With Quote
