Hood Vent Template and instructions

**ben916** · November 16th, 2011, 16:57

Originally Posted by TaTaPiRaTa

Hi!

Anybody still has the manual how to cut those hoods from the first post? Your help is very much appreciated. All links on this thread are down.

PM me pls

thanks!

There isn't a manual but there is a template

I have a copy of that template and was attempting to digitize it, then print it onto a "sticker" that you would apply to the hood, cut the hood, and finish rather quickly.
Stalled at the digitizing of it...

**speedtrapped** · November 16th, 2011, 17:07

ben pleassseeeeeee

**TaTaPiRaTa** · November 16th, 2011, 17:59

ok, so let me have it please.

I thought anybody still has the pdf or ppt file described in the beginig of this thread.

My 9 years old RS6 got nice suspension, paint, interior and exhaust revitalization, so the last part is cooling.

Anybody has the vents and the bottom cutout (sportec stuff) together ???

**TaTaPiRaTa** · November 18th, 2011, 19:56

Anyone has the template and instructions ?

Need the dimensions and how to get together the new part connected to the hole in hood ?

thanks!

**ben916** · November 18th, 2011, 20:01

Originally Posted by speedtrapped

ben pleassseeeeeee

um, is that a guffah please with rolling of eyes to the heavens or please let me have a copy?

**TaTaPiRaTa** · November 19th, 2011, 19:48

Are you going to help with sharing the template or just bullshit boosting your post count ?

thanks!

**speedtrapped** · November 19th, 2011, 23:40

What's the matter with BS. How do u think I got my 1st 1k post?.

**speedtrapped** · November 19th, 2011, 23:41

Originally Posted by ben916

um, is that a guffah please with rolling of eyes to the heavens or please let me have a copy?

Copy Ben, friend of friends,

**ben916** · July 19th, 2012, 23:52

NECRO BUMP!

Ok, hahnmgh63, now that you have the location/time/space/tools/knowledge....

I will make dedicated effort on how to get this to others.

**Chung** · July 20th, 2012, 00:21

Originally Posted by hahnmgh63

I'm kind of a geek but when I get home and pull into the garage I always pop my hood and open it up. My old Porsche 944 Turbos were very hot under the hood until I ceramic coated there exhaust manifolds and crossover pipes. Not anywhere close to doing the RS6 manifolds unless my engine needs to be pulled someday then I will do it. The 944T exhaust manifolds were double walled so I'm sure the RS6 manifolds were, even though the 944T's benefited from ceramic coating.

I see a little foreshadowing in this thread...

**ben916** · July 20th, 2012, 00:29

Originally Posted by Chung

I see a little foreshadowing in this thread...

Have you been to hahnmgh63 compound?
I was impressed!

**Chung** · July 20th, 2012, 00:39

Yes and yes I was impressed.

**lswing** · July 20th, 2012, 00:42

Have to checkout the compound one day, sounds like a sweet stable of cars, and White RS6, ahhhhhh........now that it's summer every thread regarding cooling has surfaced, hoping I stay cool without my auxiliary radiators, at least there is more air flow down there!

**ben916** · July 20th, 2012, 21:11

And I just found the powerpoint for this... unreal...

**Smiler** · August 30th, 2012, 16:25

Also intrested

Or tip of any other hood mod...

**TaTaPiRaTa** · August 31st, 2012, 08:39

Originally Posted by Smiler

Also intrested

Or tip of any other hood mod...

Me too. Please share knowledge and send us power point scheme. Thanks!

**ben916** · August 31st, 2012, 16:24

Originally Posted by TaTaPiRaTa

Me too. Please share knowledge and send us power point scheme. Thanks!

I have to find a place to host it from...
Any hints from anyone?

**TaTaPiRaTa** · September 1st, 2012, 12:24

Originally Posted by ben916

I have to find a place to host it from...
Any hints from anyone?

I can publish on my priv site for everybody. see my pm.

Thread: Hood Vent Template and instructions

Thread Tools

Rate This Thread

Display

Me too

Posting Permissions