Results 1 to 5 of 5

Thread: Part # for RS6+ springs?

  1. #1
    Registered User
    Join Date
    Jan 2007
    Location
    West Coast
    Posts
    8

    Part # for RS6+ springs?

    Anyone know the Audi (Europe) part number for the springs from the rs6+?

  2. #2
    Registered User skiwi's Avatar
    Join Date
    Nov 2006
    Location
    Living in Auckland, NZ
    Posts
    514
    there were no special springs for the rs6+.

    if you want "heavy duty springs", you need:

    4b3 411 105j - front
    4b3 511 115r - rear

    those are for the saloon, the avant is different...

    these spring were options for all rs6's....
    dave
    '03 rs6
    '04 allroad tdi

  3. #3
    Registered User
    Join Date
    Jan 2007
    Location
    West Coast
    Posts
    8
    Thank for the info. But I had heard that the RS6+ had slightly different springs, which lowered the car about another 10mm over the stock rs6. Ultimately I am trying find a suspension setup that will keep the DRC, as mine is fully functioning, while making the car handle a little better in corners. I had heard about mtm's spring perch, that keep all the stock setup, but still lowered the car roughly 10-15mm. But I can find no trace of it anywhere on the web, except a few quotes in other threads. So what are the heavy duty springs, or do you have any other suggestions?

    Cheers.

  4. #4
    Registered User skiwi's Avatar
    Join Date
    Nov 2006
    Location
    Living in Auckland, NZ
    Posts
    514
    no, the springs are weight graded. normal weight is option: pr-0jm (class 12) - although there are provisions for class 10 and 11 springs (speaking of front only here). there is a single "heavy duty" option, only specified for weight class 12, which is the number you have. this is specified by option pr-2me
    dave
    '03 rs6
    '04 allroad tdi

  5. #5
    Registered User skiwi's Avatar
    Join Date
    Nov 2006
    Location
    Living in Auckland, NZ
    Posts
    514
    i also meant to say that pr-2me also includes heavy duty shocks (again, not unique to the rs6+)....
    dave
    '03 rs6
    '04 allroad tdi

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •