Hey all,
This is just a feeler at this point. Selling this car is a last resort, however, emergencies and family come first.
The car was 6 speed swapped within the past 6 months. It drives...
Type: Posts; User: travish325
Hey all,
This is just a feeler at this point. Selling this car is a last resort, however, emergencies and family come first.
The car was 6 speed swapped within the past 6 months. It drives...
Bump. $1100 need these gone
Selling a used set of VMR v701s. These are in very good shape minus one that has a few marks and one with a very slight bend on the back. This bend does not effect the balance of the wheels at all.
...
Wow $9k??? That's essentially the price of the 6 speed swap.
Finally got my set up done.
VMR V701 19x9.5 et33, 275/30/19 tires with 12mm spacers front and back.
Had a slight bit of rubbing up front but I removed the fender liner screw and that seemed to...
Listen to everything this man says, he will not steer you wrong..
I looked around for months for a shop to build an auto that would hold 550-600hp and every single one said "of course that's easy...
Selling a set of VMR v702 wheels. These are lightweight 19x9.5in, 5x112, et33 with a 57.1mm hub bore. The wheels are practically brand new, they even still have the plastic cover on the hub caps. No...
Edit:
Disregard. I have 255s on these 8.5 wheels now. Just gonna run the 9.5s in the rear with 255s for the time being.
But now you have me worried... Is a 1.2% difference in diameter really going to cause issues? I've heard within 3-4% of diameter on a Quattro is ok.
Interesting. I'm not tracking the car or anything just driving on weekends, so handling isn't too much of a concern. That being said I think I'll try this staggered setup until I get a set of 9.5s...
But will 295s fit on 9.5 wheel? I haven't seen a lot of positivity there
So I'll have 255/35 in the front and 285/30 in back. Therefore, the fronts will be a total of 7mm taller. I'm thinking a little more air in the back should even things out. I'd love to run 295s, as...
Well I guess we'll find out soon.... I have 285/30s on the way for these 19x9.5s.
Running these in the rear will give me a 3mm sidewall difference than in the front. Does anyone think that's...
Can anyone confirm 285/35/19 will fit on the rear with 19x9.5 et33 wheels?
So I have Konis as well and my ride is absolutely awful. I think the the PO installed them at the max firmness setting. Can they be adjusted without having to take everything back out? I've heard...
Agreed on the best offset.
Btw, do you think you could fit 275s on those 19x9.5 et33s without running? I am wanting a nice wide tire in the rear.
Swapped out my V702s for V701s. These are 19x8.5 ET 45? I believe. I am running a 5mm spacer front and rear.
Thinking about swapping the rears for 19x9.5
18583
The 034 tip chip is awesome. If you want one I have a TCU from them with the chip in it. I just manual swapped mine so I'll make you a good deal on the TCU.
It's actually in the process right now with Steve Kendrish. Shoud have it back in a couple weeks. Total cost is approximately $8000; however, I am a little over that as I went with a bigger clutch...
$27,000?? Wow. Not trying to say that's a bad price, just curious if that's the going rate right now for these. Wonder what my 73k mile 6-speed swapped beast would fetch?
You wanted $89,000 and you sold for $9000? Damn, you must have been negotiating with Pawn Stars or something...
Did you have to modify the stock manifolds to bolt up to these turbos?
Thanks for all the info everyone!
The car is on its way to Steve Kendrish for the 6mt swap right now. For now I am only doing the 6mt swap, fuel pumps, injectors, and e85. Figure I'll drive it...
Interesting.
Well I will be pushing the limits if the stick turbos. I'm working with Steve Ken on the swap and nubcake on the tune. When it's all said and done it will have an aeromotive 340 in...
I would just like to know what all will and wont work with the gt2871 eliminator kit. Aka, will the oil lines, coolants lines, and wastegates all work with what is there? I am not worried about...