Search:

looks great!

do a search on this site for forgestar and you'll see some pics...I'm on KW V'3s aswell and this spring have lowered my car at least 1/2 of an inch from those pics. At some point I will try to take...

My F14's are 19*10 with an ET30 and I've had to run 5mm spacers to clear on the front. Has pushed my tires out a bit too far for my liking but I bought the wheels second hand so going with a 9 or...

The other benefit of a matt black finish is the brake dust issue won't be as bad as it is with sliver!!! I ride with gunmetal rims in the summer but am contemplating getting them finished in a...

Try searching as there are probably a lot of pictures already posted here. The one thing to remember is that the offset of whatever rim is being used will impact how flush the tire sit's to the edge...

I run 275 width tires and they are just barely flush with the fender. I'd say if you did run a 295 series tire it would be out past your fender. Given that width there'd be no way to pull it in...

fine details on that website say the lights don't fit models with the v8 4.2l engine...

Front splitters were custom made by the previous owner ( headshot who did most of the updates to the car). I had them off last year when I had them clear bra'd and offered to get some made but...

I assumed we are talking about the factory 18's

Oh, I'm running 19*10 Forgestar F14, 275/30/19's in the summer and factory 18's in the winter! And before people say...in this pic I had just raised the front suspension getting ready for my winter...

Kismecaptain is running 10mm spacers and factory 18's...read below

http://www.rs6.com/showthread.php/24403-definitive-tire-wheel-and-offset-thread?highlight=spacers

Welcome....where in Canada are you?

Headshot built in drainage trough that leads to a pipe which allows the water to drain to the wheel wells (see pictures above). I've had the car a year now and with all my washes (weekly) there's...

That sucks....good luck with the repairs!

What do you mean by Bricking? There is also talk of getting a new A3 2012 unit and then trying to find the correct faceplate. I've seen them for sale here for nearly $1500 but I'm not working with...

it to work for a north american car? Seems there are a few RNSE units for sale on Ebay in either DE or UK and if I can purchase one for cheap my wife fly's over there often and can pick it up from a...

http://i5.photobucket.com/albums/y173/gregbaker/IMG_0773.jpg
http://i5.photobucket.com/albums/y173/gregbaker/IMG_0771.jpg

http://i5.photobucket.com/albums/y173/gregbaker/IMG_0772.jpg
http://i5.photobucket.com/albums/y173/gregbaker/IMG_0779.jpg
http://i5.photobucket.com/albums/y173/gregbaker/IMG_0776.jpg...

I can post pictures if necessary but I don't have the exact measurements of the slots nor do I know how Headshot's fabricators made/set the vents. He did go so far as to include a water drain to...

Great pictures!

is it possible to get the viper tuning without shipping your ecu? My car is my daily drive so I can't really be down for several days to ship out the ecu...

Well, logic says you may want to go to an offset of 25 due to the increased width of your rim. By keeping the offset the same and widening your rim you'd be basically pushing the rim inwards. I'm...

any meaning of what is on the euro plate?

Looks great! Looks as though the front is entirely blacked out now. Mean looking. I am with you in that it would be nice to see what a set of LED's would do to the front. Thing is the...

rear upper spoiler? got any better close up pics?