Yep definitely need more fuel pump then....
Comes down to usage I think, as my car is mainly a daily driver I need to keep that low pulse width control
Type: Posts; User: milka
Yep definitely need more fuel pump then....
Comes down to usage I think, as my car is mainly a daily driver I need to keep that low pulse width control
Yeah I'm thinking E85 might do that...
What Fuel pressure are you running? I'm currently running at 3 bar but was probably going to push it up to 4 bar, but I agree it may not be enough.
I'm...
Still looking for a good easy solution for fuels pumps to handle E85 for 8*1000cc injectors before I go E85 everything else is ready. I had started on making a dual walbro 460 in tank setup but have...
Yeah if everything works as i'm hoping this should be bullet proof...
testing a solution for ARP main studs and ARP Head studs. I can let you know if my plan works.....
From a torque point of...
I've always run Mobile 1 5-50, i like the zinc and slightly better protection.
Yeah most of that is correct, I didn't want to up the boost past 21 without some strengthening. 21psi on GTX30s is very different to hybrid turbos. Planning to run around 30psi give or take
Ha ha you just read my mind....
Currently the engine is out and i'm building it up with Pauter rods, forged pistons, re-lapped bores, fully worked heads..... GTX3071 Gen II or G25-660 turbos, not...
Shame you are in the US, I can't justify sending my block to the US... Also was not sure about Nikasil coating as I had heard some reports about the coating coming off, hence the reason they chose...
I was worried about the weight of the car for the R8 wheels (especially the front wheels), hence I have the wheels at home, but nothing has been done with them yet....
Let me check the OTA part number, but I think it's ACOTA70/85L200-B will confirm tonight for you.
Are you sticking to Auto to going to manual? If you are sticking to Auto I don't think you will have a chance. With a manual you should be able to but i will be a damn tight fit, esp if yours are 2...
At the moment heads are fully built, have Pauter rods ready to go in, but still need to figure out exactly what to do for the Pistons/rings for that exact reason! Alusil.... Been talking to a...
Thanks, haven't done much lately but she has been going great in the mean time. There are plans around tuning, E85 and a built engine, then try and smash 30psi into her
Hey hey kids, what's happening? Sorry i have really not been online much at all, way too busy with work but I should be online a little bit more now.
Thanks mate, when I first tested it I actually used PVC pipe, even drove it for 30 mins like that.
Yep, exactly what I did. The MAFs that sit in the original position are S4/R32 units with the sensors cut and the inside of the pipe smoothed out. they are also positioned such that I can bolt a...
Yeah it will change the speedo a touch, but it actually changes it so that it is spot on as the speed normally reads a little low from factory.
I would not be running 295s on an 8' rim, hence why...
LOL, that's sooo funny, I never thought anyone might think that's my garage, but now I can sort of understand why.... That's my lounge room and they tiles are for my son, so he does not hit his head...
Originally started with the RS6 MAFs but they maxed out at 15psi through the GTX30s. Hence I modified the stock airbox and mounting to accept B5 S4/R32 MAFs. These only added a little bit of extra...
Just using TunerPro with some assistance from one of the Nefmoto guys
The larger starter is the RS6 starter, I'm using the smaller B7 RS4 starter as it mates to the gearbox I'm using and the starter ring on the flywheel.
No real engine bay mods as when you remove...
Thanks guys really appreciate the input
Oh, why didn't you just register and then you could see everything?
Yeah that's what I was hoping to do, but there is just not enough space in there to put 4 wastegates, 2 per bank. It's not as perfect as a true twin scroll but from everything I have read it is...
LC-1s wired up and all ready to be put into the car including capacitors to smooth out the voltage, the outputs from these are then wired into the deleted rear 02s so that ME7Logger can then log true...